Airtac SE80 Standard Cylinder SE80X150CA
The AirTAC Airtac SE80 Standard Cylinder SE80X150CA is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 150mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke150 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X150CA
The AirTAC SE80X150CA is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa. It features a 150 mm stroke and a CA single clevis mounting accessory, making it highly effective for pivoting articulated mechanisms. The extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant exterior that mounts cleanly in tight machinery spaces.
This 80 mm bore unit utilizes a PT3/8 port and a Ø25 mm piston rod with an M20x1.5 thread. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed cycling. Note that this specific SKU is configured without a position-sensing magnet, relying on mechanical travel rather than electronic feedback.
Airtac SE80 Standard Cylinder SE80X150CA Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X150CA |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 150 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X150CA
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×150 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X150CA Is Used
Press Brake Tilt Adjustment
Leverages the 2513 N push force and CA clevis mount to articulate and set the tilt angle of heavy press brake upper beams during tooling changeovers.
Pallet Diverter Gate
Utilizes the 150 mm stroke to swing heavy diverter arms on packaging lines, smoothly routing loaded pallets without tie-rod obstruction.
Textile Roll Ejection
Employs the 36 mm cushion stroke to decelerate the ejection of heavy textile rolls from winding machines, preventing end-cap damage at high speeds.
Is the Airtac SE80 Standard Cylinder SE80X150CA the Right Cylinder?
Selecting the SE80X150CA provides 2513 N of thrust at 0.5 MPa, striking a balance between the smaller 63 mm bore (1559 N push) and the larger 100 mm bore (3927 N push). If your pivot mechanism requires less force, stepping down to the 63 mm option saves space; if moving heavier jigs, the 100 mm bore offers greater capacity. Because this SKU lacks the -S magnet, you cannot mount AirTAC CMSE or DMSE position switches directly; if your process requires electronic end-of-stroke confirmation, specify an SE80X150CAS variant instead.
The CA single clevis mount is tailored for articulating loads that swing through an arc, but remember that a standard double-acting cylinder drifts when air pressure is removed or the valve centers. It cannot hold a suspended load vertically without live pressure; for fail-safe holding, integrate an external pilot-operated check valve or specify a BSE rod-lock variant. At 150 mm of travel, side loading is minimal, but always ensure the clevis pin and rod bearing are aligned to prevent premature seal wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X150CA FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X150CA is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it in to replace other 80 mm ISO 15552 profile cylinders, matching the PT3/8 port, 150 mm stroke, and CA clevis mounting dimensions exactly.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X150CA
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.