Airtac SE80 Standard Cylinder SE80X155S
The AirTAC Airtac SE80 Standard Cylinder SE80X155S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 155mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke155 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X155S
The AirTAC SE80X155S is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatic tasks. It delivers a robust 2513 N push force at 0.5 MPa alongside a 2268 N pull force, making it well-suited for high-load industrial handling. The 80 mm bore pairs with a 155 mm stroke and a PT3/8 port to ensure ample airflow for rapid actuation.
This unit features a built-in magnet (-S) for seamless integration with AirTAC CMSE reed and DMSE electronic sensors, providing precise end-of-stroke detection. Its extruded aluminum barrel omits external tie rods, yielding a sleek, corrosion-resistant profile that mounts flush while housing field-adjustable air cushions at both ends to soften hard end stops.
Airtac SE80 Standard Cylinder SE80X155S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X155S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 155 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X155S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×155 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X155S Is Used
Pallet Transfer Gates
Diverts heavy wooden pallets on roller conveyors using the 2513 N push force to reliably kick loads onto branching lanes without stalling.
Corrugated Box Forming
Drives the folding flaps on high-speed corrugated carton erectors, using the 155 mm stroke and adjustable cushions to prevent crushing the board.
Injection Mold Ejection
Pushes finished plastic parts out of injection molding tools, relying on the -S magnet and DMSE sensors to confirm full ejection before the mold closes.
Is the Airtac SE80 Standard Cylinder SE80X155S the Right Cylinder?
If your application requires less force, stepping down to the 63 mm bore yields a 1559 N push at 0.5 MPa, whereas upgrading to the 100 mm bore provides a massive 3927 N push for heavier loads. Because this is a double-acting cylinder, it will drift if air pressure is lost or the valve is centered; if you need static position holding, consider the BSE rod lock variant. The standardized ISO 15552 mounting interface guarantees a drop-in retrofit for existing ISO 15552 cylinders, matching the 80 mm bore, 155 mm stroke, PT3/8 port, and your chosen mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X155S FAQ
At 0.5 MPa, the SE80X155S delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The maximum push force is 513 kgf at 1.0 MPa.
No, the adjustable air cushions at both ends only decelerate the piston near the stroke end; they do not lock or hold a load. If the valve is centered or air is lost, the piston will drift. For static holding, use a BSE rod lock cylinder or an external pilot-operated check valve.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X155S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.