Airtac SE80 Standard Cylinder SE80X165
The AirTAC Airtac SE80 Standard Cylinder SE80X165 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 165mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke165 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X165
The AirTAC SE80X165 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 2513 N of push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. This clean profile design simplifies machining integration and reduces debris buildup.
This specific SKU is configured without a built-in magnet, meaning it ships ready for mechanical actuation but lacks provisions for CMSE or DMSE electronic position sensing without modification. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at speeds up to 800 mm/s.
Airtac SE80 Standard Cylinder SE80X165 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X165 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 165 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X165
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×165 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X165 Is Used
Corrugated Box Flap Folding
Provides the 2513 N push force required to cleanly fold heavy double-wall corrugated box flaps during high-speed case sealing lines.
Press Brake Tonnage Assist
Acts as a pneumatic assist cylinder to hold sheet metal blanks firmly in alignment during initial press brake bending operations.
Pallet Divert and Sort
Extends 165mm to push heavy wooden pallets off a main conveyor belt onto a sorting spur, relying on adjustable cushions to stop the load smoothly.
Is the Airtac SE80 Standard Cylinder SE80X165 the Right Cylinder?
Selecting the SE80X165 places you in a robust force class, offering 2513 N push at 0.5 MPa and 3518 N at 0.7 MPa. If your application requires less force, stepping down to the 63mm bore yields 1559 N push at 0.5 MPa; conversely, escalating to the 100mm bore provides 3927 N push at 0.5 MPa for heavier payloads. Because this is a plain double-acting cylinder, it will drift and cannot hold a load if air pressure is lost or the valve is centered—use a BSE rod lock variant if static holding is mandatory.
For retrofitting, this 80mm bore, 165mm stroke cylinder is dimensionally interchangeable per ISO 15552 standards, featuring a PT3/8 port and M20x1.5 rod thread. At 165mm stroke, the load is well within standard support limits, but always verify the rod bearing capacity if heavy lateral loads are applied directly to the rod end.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X165 FAQ
The SE80X165 generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum of 513 kgf at 1.0 MPa. It operates at speeds ranging from 30 to 800 mm/s.
Yes, the SE80X165 shares the exact ISO 15552 / VDMA 24562 mounting interface and dimensions, making it a drop-in replacement for other ISO 15552 profile cylinders. Note that this specific SKU lacks a sensor magnet (-S), so it does not support CMSE or DMSE position switches without modification.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X165
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.