Airtac SE80 Standard Cylinder SE80X175SFTC
The AirTAC Airtac SE80 Standard Cylinder SE80X175SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 175mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke175 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X175SFTC
The AirTAC SE80X175SFTC is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It generates 2513 N of push force and 2268 N of pull force at 0.5 MPa, utilizing an 80 mm bore and a 175 mm stroke. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while protecting internal mechanics.
This specific configuration includes a built-in magnet for CMSE and DMSE position sensing, alongside an FTC center trunnion mounting accessory. The field-adjustable air cushioning at both end caps allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at speeds up to 800 mm/s.
Airtac SE80 Standard Cylinder SE80X175SFTC Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X175SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 175 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X175SFTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×175 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X175SFTC Is Used
Injection Mold Clamping
Provides 2513 N of push force at 0.5 MPa to secure heavy injection mold halves, utilizing the FTC trunnion to accommodate pivoting clamp mechanics during the 175 mm stroke.
Pallet Diversion
Actuates heavy-duty pallet routing gates on assembly lines, where the adjustable end cushions soften the kinetic energy of redirected loads moving at high speeds.
CNC Tool Change Arm
Drives a vertical tool changer mechanism in machining centers, relying on the integrated magnet for DMSE electronic confirmation of the retracted position.
Is the Airtac SE80 Standard Cylinder SE80X175SFTC the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your force margins: stepping down to the 63 mm bore drops the 0.5 MPa push output to 1559 N, while stepping up to the 100 mm bore increases it to 3927 N. This SE80X175SFTC variant is dimensionally interchangeable with other ISO 15552 profile cylinders, ensuring a drop-in retrofit using standardized mounting hardware and its PT3/8 port. Note that a standard SE cylinder cannot hold a load if air pressure drops; for dead-load holding, consider the BSE rod lock variant instead. Furthermore, while the 25 mm rod and M20x1.5 thread handle high side loads, strokes of 300 mm or longer require an external guide to prevent rod-bearing bending.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X175SFTC FAQ
At 0.5 MPa, this 80 mm bore cylinder outputs 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at the 1.0 MPa operating pressure limit.
Yes. The SE80X175SFTC adheres to ISO 15552 / VDMA 24562 dimensional standards, making it a drop-in replacement for other profile cylinders with the same 80 mm bore, 175 mm stroke, PT3/8 port, and FTC trunnion footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X175SFTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.