Airtac SE80 Standard Cylinder SE80X200FTC
The AirTAC Airtac SE80 Standard Cylinder SE80X200FTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X200FTC
The AirTAC SE80X200FTC is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a robust 2513 N push force at 0.5 MPa and a maximum capacity of 513 kgf at 1.0 MPa. It features a 200 mm stroke and a PT3/8 port, driven by a 25 mm hard-chrome piston rod with an M20x1.5 end thread. The FTC mounting accessory provides a rigid front trunnion interface for heavy-duty pivoting or fixed placements.
Unlike traditional tie-rod bodies, this unit utilizes a square extruded aluminum barrel that houses sensor grooves on three sides, yielding a compact, flush-mounting footprint that naturally resists corrosion. The field-adjustable pneumatic cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s. Note that this specific SKU is supplied without a piston magnet, meaning it is not natively compatible with CMSE or DMSE electronic position sensors out of the box.
Airtac SE80 Standard Cylinder SE80X200FTC Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X200FTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X200FTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X200FTC Is Used
Injection Moulding Extraction
Utilizes the 2513 N push force to positively extract heavy automotive plastic bumpers from moulds, relying on the FTC mount to handle the abrupt deceleration forces during high-speed retraction.
Corrugated Box Forming
Drives the main folding plow on a continuous corrugated carton erecting line, where the 200 mm stroke provides the precise travel needed to square up large bulk shipping containers.
CNC Pallet Clamping
Actuates a secondary heavy-duty pallet stopper on a machining center conveyor, using the 513 kgf maximum holding strength to securely index raw aluminum castings into the working envelope.
Is the Airtac SE80 Standard Cylinder SE80X200FTC the Right Cylinder?
Choosing this 80 mm bore makes sense when your application requires the 2513 N push at 0.5 MPa provided here. If your load is lighter, stepping down to the 63 mm bore yields 1559 N of push force, whereas stepping up to the 100 mm bore provides a substantial 3927 N. Because the 200 mm stroke is substantial, the 25 mm rod and internal bearing face bending loads under high side forces; always pair this cylinder with an external guide rail to prevent premature seal wear. As a standard ISO 15552 profile cylinder, it serves as a dimensionally interchangeable drop-in replacement for other ISO 15552 cylinders, sharing standardized mounting and PT3/8 port dimensions. Remember that the adjustable air cushion only decelerates the piston near the stroke ends and does not function as a locking device; if your system loses air pressure, the cylinder will drift, so integrate a BSE rod lock or external pilot-operated check valve for fail-safe load holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X200FTC FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with an absolute maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
This specific SKU does not include a built-in magnet, so it cannot support AirTAC CMSE or DMSE position sensors without modification. Dimensionally, it adheres strictly to the ISO 15552 standard, meaning it is fully interchangeable with other ISO 15552 profile cylinders regarding mounting footprints and port locations, without being identical to any specific brand's proprietary part.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X200FTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.