Airtac SE80 Standard Cylinder SE80X200SFTC
The AirTAC Airtac SE80 Standard Cylinder SE80X200SFTC is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 200mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke200 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X200SFTC
The AirTAC SE80X200SFTC is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering 2513 N of push force at 0.5 MPa. Driven by a 25 mm hard-chrome rod with an M20x1.5 thread, it handles substantial side loads while maintaining a compact footprint. The square extruded aluminum barrel eliminates external tie rods, yielding a flush body that resists corrosion and simplifies sensor mounting across three integrated grooves.
This 80 mm bore configuration includes a built-in magnet (-S) for CMSE and DMSE position sensing, paired with an FTC center trunnion mount for complex pivot actuation. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration precisely, protecting machinery from hard impacts during high-speed 30-800 mm/s cycles.
Airtac SE80 Standard Cylinder SE80X200SFTC Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X200SFTC |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X200SFTC
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X200SFTC Is Used
CNC Fixture Clamping
Provides 2513 N of push force at 0.5 MPa to secure heavy cast iron engine blocks during multi-axis CNC machining, utilizing the FTC mount for angular self-alignment.
Palletizer Carton Pusher
Exerts 3518 N at 0.7 MPa to divert heavy shipping cartons onto packaging conveyors, relying on the DMSE electronic sensor for precise 200 mm stroke confirmation.
Injection Mold Ejection
Drives heavy mold halves open with 2268 N of pull force, using the adjustable end cushions to soften rapid retraction and protect expensive tooling from shock.
Is the Airtac SE80 Standard Cylinder SE80X200SFTC the Right Cylinder?
Select this 80 mm bore when a 50 mm cylinder (982 N push @0.5 MPa) lacks thrust or a 100 mm bore (3927 N push @0.5 MPa) is oversized. The FTC mount provides a fixed trunnion bearing at the cylinder centerline, ideal for articulated mechanisms requiring angular movement. Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If air pressure drops, the rod drifts, requiring a BSE rod lock for fail-safe positioning.
With a 200 mm stroke, the 25 mm rod and M20x1.5 thread provide excellent structural rigidity. For applications exceeding 300 mm of travel, always verify bearing loads and utilize an external guide to prevent rod bending. This unit is dimensionally interchangeable with other ISO 15552 profile cylinders, ensuring seamless retrofitting using standard mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X200SFTC FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa operating pressure.
Yes, the SE80X200SFTC is dimensionally interchangeable per ISO 15552 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, utilizing the same PT3/8 port and FTC mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X200SFTC
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.