Airtac SE80 Standard Cylinder SE80X210
The AirTAC Airtac SE80 Standard Cylinder SE80X210 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 210mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke210 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X210
The AirTAC SE80X210 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. Featuring an 80 mm bore and a 210 mm stroke, it operates efficiently at speeds between 30-800 mm/s. The extruded aluminum barrel design omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This unit relies on a PT3/8 port and a 25 mm hard-chrome piston rod with an M20x1.5 thread. Field-adjustable air cushioning at both end caps allows technicians to tune deceleration and soften hard mechanical stops during high-speed cycling. As this specific SKU lacks the internal -S magnet, it is not natively equipped for CMSE or DMSE electronic position sensing without modification.
Airtac SE80 Standard Cylinder SE80X210 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X210 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 210 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X210
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×210 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X210 Is Used
Press Die Ejection
Provides the 2513 N push force required to eject heavy stamped metal panels from press dies, utilizing the 210 mm stroke to fully clear the tooling bed.
Pallet Diverting
Handles robust side-load diverting of loaded pallets on a packaging line, where the hard-chrome 25 mm rod withstands repeated lateral impacts during transit.
Corrugated Box Flap Folding
Drives heavy mechanical arms to fold thick corrugated cardboard flaps on high-volume carton sealing machinery, relying on tuned end-cushions to prevent arm shock.
Is the Airtac SE80 Standard Cylinder SE80X210 the Right Cylinder?
Selecting the SE80X210 is appropriate when your mechanism requires substantial thrust, such as heavy lifting or high-pressure forming. If you need to scale down, the 63 mm bore variant provides 1559 N of push force at 0.5 MPa; stepping up to the 100 mm bore yields 3927 N. Because this model has a 210 mm stroke, it is crucial to manage side loading—long unsupported extensions induce bending moments on the rod bearing, so utilizing an external guide rail is highly recommended to prevent premature seal wear.
This cylinder serves as a dimensionally interchangeable drop-in replacement for other ISO 15552 cylinders, sharing identical mounting and footprint dimensions. Remember that the adjustable air cushion only decelerates the piston near stroke end and does not function as a locking device; if your application must hold a vertical load without live air pressure, you must integrate an external pilot-operated check valve or specify a BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X210 FAQ
At 0.5 MPa, the SE80X210 delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552 standards, matching the exact mounting interface of competing profile cylinders. However, the adjustable cushion only decelerates the piston at stroke end and does not hold the load; if air pressure is lost, the cylinder will drift.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X210
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.