Airtac SE80 Standard Cylinder SE80X290
The AirTAC Airtac SE80 Standard Cylinder SE80X290 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 290mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke290 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X290
The AirTAC SE80X290 is a double-acting single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics, delivering 2513 N of push force at 0.5 MPa. Its square extruded aluminum barrel completely eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while exposing standardized ISO 15552 interface dimensions for seamless retrofitting. The unit is configured without a built-in magnet, meaning it is ready for mechanical actuation but lacks position feedback unless external sensors are added.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune the end-of-stroke deceleration via a set screw, softening hard impacts when moving heavy loads at speeds up to 800 mm/s. This 80 mm bore utilizes a PT3/8 port, a 25 mm hard-chrome plated rod, and an M20x1.5 rod-end thread to handle substantial thrust without compromising structural integrity.
Airtac SE80 Standard Cylinder SE80X290 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X290 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 290 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X290
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×290 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X290 Is Used
Pallet Transfer Diverter
Leverages the 2513 N push force at 0.5 MPa to reliably divert heavy loaded pallets onto secondary conveyor lines without stalling.
Press Brake Clamping
Utilizes the 290 mm stroke to secure and position large sheet metal panels during heavy industrial press brake bending operations.
Heavy Carton Sealing
Applies consistent downward pressure for folding and sealing large, bulky corrugated cartons in high-throughput end-of-line packaging systems.
Is the Airtac SE80 Standard Cylinder SE80X290 the Right Cylinder?
Selecting this 80 mm bore cylinder makes sense when your application requires the 2513 N push force at 0.5 MPa that it provides. If your load is lighter, stepping down to the 63 mm bore drops the 0.5 MPa push output to 1559 N, saving valuable space and air consumption. Conversely, if you need to move significantly heavier payloads, stepping up to the 100 mm bore increases the 0.5 MPa push force to 3927 N. Because this is a 290 mm stroke, the 25 mm rod and internal bearing face bending stresses under high side loads; utilizing an external guide rail is strongly recommended to prevent premature seal wear.
As a dimensionally interchangeable ISO 15552 cylinder, the SE80X290 serves as a direct drop-in replacement for other ISO 15552 profile cylinders, matching the exact mounting footprint and PT3/8 port locations. Note that this specific SKU lacks the -S magnet option, so it cannot host AirTAC CMSE or DMSE position sensors without modifying the piston. Furthermore, the adjustable air cushion only decelerates the piston near the stroke ends and does not hold the load if air pressure is lost; for true position holding, consider the BSE rod-lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X290 FAQ
The SE80X290 provides a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force increases to 3518 N. The maximum push force is 513 kgf at 1.0 MPa. The operating speed range for this 80 mm bore cylinder is 30-800 mm/s.
Yes, the SE80X290 features an extruded aluminum profile barrel with standardized ISO 15552 mounting dimensions, making it dimensionally interchangeable with other ISO 15552 profile cylinders. It uses a PT3/8 port and includes field-adjustable air cushions at both ends to fine-tune end-stop deceleration.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X290
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.