Airtac SE80 Standard Cylinder SE80X35
The AirTAC Airtac SE80 Standard Cylinder SE80X35 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 35mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke35 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X35
The AirTAC SE80X35 is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty pneumatics. It generates 2513 N of push force at 0.5 MPa and 2268 N of pull force, utilizing a 25 mm hard-chrome rod with an M20x1.5 thread. The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames.
This unit features field-adjustable air cushions at both ends to decelerate the piston over a 36 mm stroke length, preventing hard end-stop impacts at operating speeds up to 800 mm/s. As this specific SKU lacks the built-in magnet (-S), it does not support direct CMSE or DMSE position sensing without modification. The PT3/8 port ensures high flow capacity for rapid actuation.
Airtac SE80 Standard Cylinder SE80X35 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X35 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 35 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X35
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×35 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X35 Is Used
Injection Mold Clamping
Provides 2513 N of push force at 0.5 MPa to secure mid-sized injection mold halves within a 35 mm stroke range.
Press Brake Stopping
Acts as a positive back-stop for sheet metal in a press brake, using the 25 mm rod to absorb heavy side loads.
Pallet Diverter
Handles heavy wooden pallets on a high-throughput conveyor line, utilizing the PT3/8 port for rapid 35 mm extension.
Is the Airtac SE80 Standard Cylinder SE80X35 the Right Cylinder?
With a 2513 N push at 0.5 MPa, this 80 mm bore is sized for substantial loads. If your application requires less force, stepping down to the 63 mm bore yields 1559 N of push, while moving up to the 100 mm bore provides 3927 N. Because this is a standard double-acting cylinder, it will drift if air pressure is lost—use a BSE rod lock variant if static holding is required. For ISO 15552 dimensional interchangeability, match the 80 mm bore, 35 mm stroke, PT3/8 port, and your chosen mounting accessory.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X35 FAQ
At 0.5 MPa, the SE80X35 delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, push increases to 3518 N. The maximum operating pressure is 1.0 MPa, yielding a maximum push of 513 kgf.
Yes. The SE80X35 is dimensionally interchangeable per ISO 15552 standards. You can drop it in as a replacement for other ISO 15552 cylinders by matching the 80 mm bore, 35 mm stroke, PT3/8 port, and mounting footprint.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X35
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.