
The AirTAC SE80 Standard Cylinder SE80X40S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 40mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE80X40S is a double-acting, single-rod ISO 15552 profile cylinder engineered for heavy-duty positioning. It delivers a robust 2513 N push force at 0.5 MPa (3518 N at 0.7 MPa), utilizing an 80 mm bore and a short 40 mm stroke to power high-impact operations in tight spaces. The integrated -S magnet enables direct mounting of CMSE reed or DMSE electronic sensors along the extruded barrel for precise end-of-stroke detection.
Its square aluminum profile eliminates external tie rods, presenting a flush, corrosion-resistant surface that simplifies bracket mounting and machine cleanup. Field-adjustable air cushions at both ends allow technicians to tune end-of-stroke deceleration, protecting the internal mechanics from hard impacts during rapid 30-800 mm/s cycles.
| Model | Airtac SE80 Standard Cylinder SE80X40S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 40 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×40 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 2513 N push force at 0.5 MPa to knock heavy stamped metal panels out of a die, with the 40 mm stroke delivering rapid retraction for high-cycle production.
Swings a heavy guard rail to reroute loaded pallets on a packaging line, relying on the 80 mm bore thrust and DMSE electronic sensors for positional feedback.
Drives a mechanical arm to fold heavy cardboard flaps prior to sealing, utilizing the compact 40 mm stroke to maintain a tight machine envelope.
Selecting this 80 mm bore with a 40 mm stroke is ideal when you need substantial clamping or lifting power within a compact footprint. If your application requires less force, stepping down to the 63 mm bore yields 1559 N push at 0.5 MPa. Conversely, if you need maximum thrust, stepping up to the 100 mm bore provides 3927 N push at 0.5 MPa. Because this is a standard double-acting cylinder, it will drift if air pressure is lost; use a BSE rod lock variant if the load must be held securely during an emergency stop.
As a true ISO 15552 profile cylinder, the SE80X40S is dimensionally interchangeable with other ISO 15552 cylinders, allowing direct retrofits using existing mounting hardware like FA front flanges or TC trunnions. It features a PT3/8 port and a 25 mm rod with an M20x1.5 thread. The short 40 mm stroke keeps side-load stress on the rod bearing minimal, though external guides are always recommended for heavy off-center loads.
Quick checklist
The SE80X40S provides 2513 N push and 2268 N pull at 0.5 MPa. At 0.7 MPa, the push force is 3518 N, and the maximum push is 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X40S is dimensionally interchangeable per ISO 15552 standards. You can drop it into existing mounts using the standardized footprint, and the built-in -S magnet works directly with AirTAC CMSE and DMSE sensors.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.