Airtac SE80 Standard Cylinder SE80X45S
The AirTAC Airtac SE80 Standard Cylinder SE80X45S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 45mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke45 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X45S
The AirTAC SE80X45S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa across its 45 mm stroke. Because it utilizes a square extruded aluminum barrel without external tie rods, the body is highly corrosion-resistant and allows for flush mounting on machinery frames. The integrated -S magnet enables direct fitment of AirTAC CMSE reed or DMSE electronic position sensors along the three dedicated sensor grooves.
This 80 mm bore actuator features field-adjustable pneumatic cushioning at both ends, allowing technicians to precisely tune end-of-stroke deceleration and eliminate hard impacts during high-speed 30-800 mm/s operations. The Ø25 mm piston rod and M20x1.5 thread provide a rigid interface capable of handling moderate side loads, while the standardized ISO 15552 mounting interface ensures seamless dimensional interchangeability with other global profile cylinders.
Airtac SE80 Standard Cylinder SE80X45S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X45S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 45 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X45S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×45 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X45S Is Used
Injection Mold Ejection
Provides the 2513 N push force required to positively eject dense plastic injection molded parts from heavy steel tooling within a compact 45 mm stroke.
Case Sealing Flap Fold
Utilizes the integrated -S magnet with DMSE sensors to verify the exact position of the folding blade mechanism before the carton sealer applies adhesive.
Press Brake Backgauge
Positions the sheet metal backgauge stop on a press brake, relying on the rigid Ø25 mm rod and adjustable end cushions to absorb rapid directional shifts.
Is the Airtac SE80 Standard Cylinder SE80X45S the Right Cylinder?
Selecting the SE80X45S is optimal when your application requires substantial thrust; it delivers 2513 N of push force and 2268 N of pull force at 0.5 MPa. If your load demands less force, stepping down to the 63 mm bore yields 1559 N of push, whereas scaling up to the 100 mm bore provides 3927 N of push at the same pressure. This model includes the -S magnet for CMSE or DMSE switches and uses a PT3/8 port.
Remember that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If air pressure is lost, the cylinder drifts, requiring a BSE rod lock for secure positioning. Because the 45 mm stroke is short, side-load stress on the rod bearing is minimal, but always verify the rod-end thread M20x1.5 matches your mechanical linkage.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X45S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes. The SE80X45S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and rod thread (M20x1.5) as competing profile cylinders, making it a drop-in retrofit. It also features a built-in magnet for AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X45S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.