verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE80 Standard Cylinder SE80X470

The AirTAC SE80 Standard Cylinder SE80X470 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 470mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ80 mm
  • Stroke470 mm
  • Port sizePT3/8
  • Acting typeDouble acting
  • Rod threadM20×1.5
  • CushionAdjustable, 36 mm
$189.59 $197.09Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE80 stroke, mounting and version on one page All SE80 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE80 Standard Cylinder SE80X470

The AirTAC SE80X470 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver 2513 N of push force and 2268 N of pull force at 0.5 MPa. Driven by a 25 mm piston rod, it provides a 470 mm stroke and operates efficiently between 30-800 mm/s.

Built with an extruded aluminum barrel, this profile body omits external tie rods to offer a flush, corrosion-resistant exterior that simplifies mounting. The field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, softening hard mechanical impacts during high-speed operations.

Airtac SE80 Standard Cylinder SE80X470 Technical Specifications

ModelAirtac SE80 Standard Cylinder SE80X470
SeriesSE ISO 15552 profile cylinder
Bore sizeØ80 mm
Stroke470 mm
Acting typeDouble acting
Port sizePT3/8
Rod threadM20×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 36 mm
Max strokeUp to 1500 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø80mm)

PressurePush forcePull force
0.5 MPa2513 N2268 N
0.7 MPa3519 N—
Max (@1.0 MPa)513 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE80 Standard Cylinder SE80X470

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
80Bore size in mm.
×470Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE80 Standard Cylinder SE80X470 Is Used

factory

Automotive Stamping Press

Drives heavy lower dies in a stamping press, utilizing the 2513 N push force to securely lock 470 mm tall tooling plates into position before the impact cycle.

conveyor_belt

Pallet Dispenser Gate

Actuates a heavy pneumatic diverter gate on an automated packaging line, requiring the full 470 mm stroke to clear oversized pallets from the main conveyor flow.

straighten

Wood Board Press

Applies vertical clamping pressure in a multi-layer plywood press, where the 80 mm bore output ensures rigid alignment of wood sheets during the adhesive curing process.

Is the Airtac SE80 Standard Cylinder SE80X470 the Right Cylinder?

If your application requires less thrust, stepping down to the 63 mm bore yields 1559 N of push at 0.5 MPa, whereas upgrading to the 100 mm bore provides 3927 N. Since this 470 mm stroke creates a long unsupported rod span, an external guide is strongly recommended to prevent bearing bending and premature seal wear from side loads.

This SKU lacks the built-in magnet (-S), meaning it is not ready for CMSE or DMSE position sensors without modification. As a true ISO 15552 profile cylinder, it serves as a direct replacement for other ISO 15552 cylinders, sharing standard mounting interface dimensions and PT3/8 ports.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE80 Standard Cylinder SE80X470 FAQ

At 0.5 MPa, the SE80X470 provides 2513 N push and 2268 N pull. At 0.7 MPa, the push increases to 3518 N, with a maximum push of 513 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.

No, the SE80X470 is a standard double-acting cylinder and will drift if air is lost or the valve is centered. The adjustable air cushion only decelerates the piston near stroke end and does not act as a brake. For position holding, use a BSE rod lock variant or an external pilot-operated check valve.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE80 Standard Cylinder SE80X470

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE80X470 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.