Airtac SE80 Standard Cylinder SE80X475
The AirTAC Airtac SE80 Standard Cylinder SE80X475 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 475mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke475 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X475
The AirTAC SE80X475 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. Its extruded aluminum barrel omits external tie rods, yielding a flush, corrosion-resistant body that simplifies flush mounting on machinery while maintaining the standardized ISO 15552 footprint for seamless retrofits.
This 80 mm bore unit features a Ø25 mm piston rod with an M20x1.5 thread and PT3/8 ports. It includes field-adjustable pneumatic cushioning at both ends to decelerate the payload smoothly over the 475 mm stroke. Note this specific SKU lacks the -S magnet, so it is not equipped for CMSE or DMSE position sensing without modification.
Airtac SE80 Standard Cylinder SE80X475 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X475 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 475 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X475
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×475 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X475 Is Used
Pallet Transfer Reject
Provides the 2513 N push force needed to divert heavy loaded pallets off a main conveyor line during an automated quality control reject process.
Heavy Box Flap Folder
Utilizes the 475 mm stroke to reach across wide packaging stations, folding large corrugated box flaps prior to the final sealing head.
Injection Mold Extraction
Drives robust part extraction arms out of large injection molding machines, where the 80 mm bore handles significant mold drag resistance.
Is the Airtac SE80 Standard Cylinder SE80X475 the Right Cylinder?
Delivering 2513 N push at 0.5 MPa, this 80 mm bore is a heavy-duty workhorse. If your application requires less force, stepping down to the 63 mm bore yields 1559 N push, while moving up to the 100 mm bore provides 3927 N push. Because the stroke is 475 mm, the extended rod is subject to bending under lateral loads; an external guide rail is strongly recommended to prevent premature rod-bearing wear.
This model serves as a drop-in replacement for any ISO 15552 cylinder with an 80 mm bore, 475 mm stroke, PT3/8 port, and basic mounting. Keep in mind that a standard SE cylinder relies on live air pressure to hold position; if air is lost, the piston drifts. For fail-safe load holding, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X475 FAQ
At 0.5 MPa, the push force is 2513 N and the pull force is 2268 N. At 0.7 MPa, the push force is 3518 N. The maximum push force is 513 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE80X475 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders with an 80 mm bore, matching mounting hardware, and PT3/8 ports.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X475
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.