Airtac SE80 Standard Cylinder SE80X5
The AirTAC Airtac SE80 Standard Cylinder SE80X5 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 5mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke5 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X5
The AirTAC SE80X5 is a double-acting, single-rod ISO 15552 profile cylinder engineered for short-travel, high-force execution. Operating at 0.5 MPa, it provides a robust 2513 N push force and 2268 N pull force, making it ideal for compact pressing or holding tasks. The extruded aluminum barrel eliminates external tie rods, yielding a flush, corrosion-resistant body that mounts cleanly in tight machine envelopes.
This specific SKU is configured without a built-in magnet, meaning it does not support CMSE or DMSE position sensing out of the box. Both end caps feature a field-adjustable air cushion (36 mm stroke length) that can be tuned with a screw to soften hard mechanical stops during rapid cycling. It is a true ISO 15552 dimensional interchangeable component, allowing seamless integration with standardized mounting hardware.
Airtac SE80 Standard Cylinder SE80X5 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X5 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 5 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X5
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×5 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X5 Is Used
Stamping Press Ejection
Uses the 5 mm stroke to deliver a rapid 2513 N push for kicking finished parts out of a die without occupying valuable machine footprint.
Heavy-Duty Spot Clamping
Leverages the 80 mm bore and 2268 N pull force to lock large steel weldments rigidly in a fixture during robotic welding.
Packaging Valve Actuation
Drives a high-flow diverter gate on a filling line, relying on the adjustable 36 mm cushion to absorb kinetic energy at the end caps.
Is the Airtac SE80 Standard Cylinder SE80X5 the Right Cylinder?
Selecting the SE80X5 makes sense when a brief 5 mm movement must transfer substantial thrust, such as clamping a heavy workpiece or actuating a short-stroke press. If 2513 N of push at 0.5 MPa is excessive for your setup, stepping down to the 63 mm bore yields 1559 N. Conversely, if you need to overpower stiff tooling resistance, stepping up to the 100 mm bore provides 3927 N. Keep in mind that a standard SE cylinder will drift and cannot hold a load if air pressure drops or the valve is centered; a BSE rod lock variant is required for true pneumatic fail-safe holding.
Because the 5 mm stroke is so short, rod-bearing bending and side-load stress are negligible, allowing direct mounting without an external guide. The PT3/8 port ensures rapid airflow to cycle the 25 mm rod rapidly within its 30-800 mm/s speed range.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X5 FAQ
At 0.5 MPa, the SE80X5 delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N. The absolute maximum push force is 513 kgf when operated at the maximum rated pressure of 1.0 MPa.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a drop-in replacement for other ISO 15552 profile cylinders without requiring new mounting hardware. However, this specific SKU lacks the built-in magnet (-S), so it cannot support CMSE reed or DMSE electronic sensors; you would need an S-suffixed variant for position feedback.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X5
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.