Airtac SE80 Standard Cylinder SE80X60S
The AirTAC Airtac SE80 Standard Cylinder SE80X60S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 60mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke60 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X60S
The AirTAC SE80X60S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding pneumatic tasks. It delivers a robust 2513 N push force at 0.5 MPa alongside a 2268 N pull force, making it well-suited for heavy-duty actuation. The extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
Equipped with a built-in magnet, this unit directly supports AirTAC CMSE reed and DMSE electronic position sensing. Field-adjustable pneumatic cushioning at both ends allows technicians to fine-tune end-of-stroke deceleration, effectively absorbing kinetic energy rather than relying on a fixed bumper. Furthermore, its standardized ISO 15552 mounting interface guarantees dimensional interchangeability with comparable profile cylinders, simplifying retrofits.
Airtac SE80 Standard Cylinder SE80X60S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X60S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X60S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X60S Is Used
Bottling Line Diverters
Handles heavy product diversion on high-speed bottling conveyors using the 2513 N push force and 60 mm stroke.
Pallet Case Erectors
Folds heavy corrugated cardboard flaps during case erecting, utilizing the 36 mm adjustable cushion to soften the hard end stop.
Press Brake Material Pushers
Feeds sheet metal blanks into press brakes, where the flush extruded profile and built-in DMSE sensor track ensure precise positioning.
Is the Airtac SE80 Standard Cylinder SE80X60S the Right Cylinder?
When sizing this 80 mm bore actuator, evaluate your kinetic energy against its 2513 N push at 0.5 MPa. If your application requires less force, the 63 mm bore offers 1559 N push, whereas stepping up to the 100 mm bore yields 3927 N. Remember that a standard SE cylinder cannot hold a load if air pressure drops; for fail-safe position holding, consider the BSE rod lock variant. For drop-in retrofits, match the 80 mm bore, 60 mm stroke, PT3/8 port, and mounting hardware, ensuring the -S magnet is specified for CMSE or DMSE sensors.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X60S FAQ
The SE80X60S generates 2513 N push and 2268 N pull at 0.5 MPa, 3518 N push at 0.7 MPa, and a maximum push of 513 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.
Yes, the SE80X60S is dimensionally interchangeable per ISO 15552 standards, allowing it to serve as a drop-in replacement for other ISO 15552 profile cylinders without altering mounting footprints.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.