Airtac SE80 Standard Cylinder SE80X65
The AirTAC Airtac SE80 Standard Cylinder SE80X65 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 65mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke65 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X65
The AirTAC SE80X65 is a double-acting single-rod profile cylinder built to the ISO 15552 dimensional standard, generating 2513 N of push force and 2268 N of pull force at 0.5 MPa. Its square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while leaving the three integrated sensor grooves fully accessible.
This 80 mm bore unit features a Ø25 mm piston rod with an M20x1.5 thread, and utilizes field-adjustable pneumatic cushioning at both ends to decelerate the piston near the stroke limits. Because this specific SKU lacks the built-in magnet suffix, it does not support direct CMSE or DMSE position sensing without modification.
Airtac SE80 Standard Cylinder SE80X65 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X65 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 65 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X65
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×65 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X65 Is Used
Press Fit Bushings
Supplies the 2513 N push force at 0.5 MPa needed to seat bearings and bushings into housings on automotive assembly lines without a full hydraulic press.
Corrugated Box Flap Folding
Uses the short 65 mm stroke to rapidly fold heavy cardboard flaps prior to sealing, relying on the 36 mm adjustable end cushion to soften hard impacts.
Pallet Diverter Gate
Pushes heavy timber pallets off a high-speed conveyor using the 3518 N thrust available at 0.7 MPa, leveraging the no-tie-rod profile to mount flush.
Is the Airtac SE80 Standard Cylinder SE80X65 the Right Cylinder?
If 2513 N of push at 0.5 MPa is too much for your fixture, step down to the 63 mm bore which provides 1559 N. If your mechanism requires more thrust, move up to the 100 mm bore offering 3927 N. Keep in mind that a standard SE cylinder will drift and cannot hold a load if air pressure is lost or the valve is centered; for fail-safe position holding, specify the BSE rod-lock variant.
As a true ISO 15552 profile cylinder, the SE80X65 is dimensionally interchangeable with other ISO 15552 cylinders and shares standardized mounting hardware. To match this SKU exactly, select an 80 mm bore, 65 mm stroke, PT3/8 port, and default medium-carbon steel rod without a magnet.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X65 FAQ
At 0.5 MPa, the SE80X65 delivers 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force is 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, meaning it serves as a drop-in replacement for other ISO 15552 profile cylinders using standard mounting hardware. However, it is a standard double-acting cylinder and will drift if air is lost; you need the BSE variant for secure rod locking.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X65
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.