Airtac SE80 Standard Cylinder SE80X830S
The AirTAC Airtac SE80 Standard Cylinder SE80X830S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 830mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke830 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X830S
The AirTAC SE80X830S is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding linear motion tasks. Operating at 0.5 MPa, it generates 2513 N of push force and 2268 N of pull force, utilizing a robust Ø25 mm piston rod with an M20x1.5 thread. Its 830 mm stroke is a non-standard, made-to-order length designed to fulfill extended travel requirements.
This model features a square extruded aluminum barrel without external tie rods, creating a compact, corrosion-resistant body that mounts flush against machine frames. Equipped with a built-in magnet (-S), it seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection. The field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, protecting the mechanics during high-speed operations up to 800 mm/s.
Airtac SE80 Standard Cylinder SE80X830S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X830S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 830 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X830S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×830 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X830S Is Used
Pallet Transfer Line
Drives the extended push-off stroke required to transfer heavy loaded pallets between parallel roller conveyors, utilizing the 2513 N push force to overcome rolling resistance over the 830 mm travel.
Automated Press Ejector
Ejects formed sheet metal parts from large stamping presses, relying on the 3518 N push force at 0.7 MPa and the DMSE electronic sensor to confirm full part clearance before the press cycle restarts.
Vertical Goods Lift Gate
Actuates the heavy sliding security gate on a multi-tier vertical storage lift, where the 830 mm stroke provides the necessary clearance and the adjustable cushion softens the impact at full extension.
Is the Airtac SE80 Standard Cylinder SE80X830S the Right Cylinder?
Selecting the SE80X830S is appropriate when an application requires substantial force over a very long travel distance. If you need to scale down, the 63 mm bore provides 1559 N of push at 0.5 MPa, whereas stepping up to the 100 mm bore yields 3927 N. Because this cylinder features an 830 mm stroke, the unsupported mass of the rod mandates careful attention to side-load bending; pairing it with an external linear guide is strongly recommended to prevent premature rod-bearing wear.
As a true ISO 15552 profile cylinder, this unit is dimensionally interchangeable with other ISO 15552 cylinders, ensuring a straightforward retrofit using existing mounting hardware. It features a PT3/8 port and includes the -S magnet for position sensing. Remember that the adjustable air cushion only decelerates the piston near stroke end and does not function as a locking device; if the pneumatic supply is lost, the load will drift, requiring an external rod lock or pilot-operated check valve for secure holding.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X830S FAQ
At 0.5 MPa, this 80 mm bore cylinder provides 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates at speeds of 30-800 mm/s and features a PT3/8 port.
Yes, the SE80X830S is dimensionally interchangeable with other ISO 15552 profile cylinders and shares standard mounting dimensions. However, it does not hold its position if air pressure is lost; the adjustable air cushion only decelerates the piston near the end of the stroke and acts as a brake.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X830S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.