Airtac SE80 Standard Cylinder SE80X90
The AirTAC Airtac SE80 Standard Cylinder SE80X90 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 90mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke90 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X90
The AirTAC SE80X90 is a double-acting single-rod ISO 15552 profile cylinder engineered to deliver a robust 2513 N push force at 0.5 MPa. Featuring a 90 mm stroke and a Ø25 mm piston rod, it provides substantial thrust for heavy-duty automation tasks.
Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames. The field-adjustable pneumatic cushioning at both ends allows technicians to precisely tune end-of-stroke deceleration, protecting payloads from hard impacts. This specific SKU is supplied without a position-sensing magnet, operating purely as a blind actuator.
Airtac SE80 Standard Cylinder SE80X90 Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X90 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X90
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X90 Is Used
Pallet Diverters
Leverages the 2513 N push force at 0.5 MPa to positively divert heavy loaded pallets weighing up to 500 kg onto secondary packaging lines.
Hydraulic Press Ejection
Uses the 90 mm stroke to rapidly eject formed metal parts from a hydraulic press bed, relying on the 36 mm adjustable cushion to soften end stops.
Corrugated Box Flappers
Drives the mechanical flapping arms on high-speed case erectors, where the tie-rod-free extruded profile prevents dust buildup and allows easy cleaning.
Is the Airtac SE80 Standard Cylinder SE80X90 the Right Cylinder?
When sizing this actuator, consider stepping down to the 63 mm bore if your application only requires 1559 N of push force at 0.5 MPa, or stepping up to the 100 mm bore for demanding jobs needing 3927 N. The SE80X90 strikes an effective middle ground, utilizing PT3/8 ports and an M20x1.5 rod thread to handle significant side loads.
Because this model lacks a -S magnet, position verification requires external limit switches. Furthermore, if your process demands positive load holding upon air loss, note that the standard adjustable cushion only decelerates the piston near stroke end and does not act as a brake; you would need to specify a BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X90 FAQ
At 0.5 MPa, the SE80X90 generates 2513 N of push force and 2268 N of pull force. At 0.7 MPa, the push force increases to 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. The operating speed range is 30-800 mm/s.
Yes, the SE80X90 is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can use it as a drop-in replacement for other ISO 15552 profile cylinders, matching the standard mounting accessories and PT3/8 port locations.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X90
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.