Airtac SE80 Standard Cylinder SE80X90S
The AirTAC Airtac SE80 Standard Cylinder SE80X90S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø80mm bore and 90mm stroke, PT3/8 air ports and adjustable end cushioning. Its standardized mounting interface makes it a drop-in replacement for other ISO 15552 cylinders in automation lines.
- BoreØ80 mm
- Stroke90 mm
- Port sizePT3/8
- Acting typeDouble acting
- Rod threadM20×1.5
- CushionAdjustable, 36 mm
About the Airtac SE80 Standard Cylinder SE80X90S
The AirTAC SE80X90S is a double-acting single-rod ISO 15552 profile cylinder delivering 2513 N of push force at 0.5 MPa. Built with a square extruded aluminum barrel free of external tie rods, it offers a compact, corrosion-resistant body that mounts flush against machine frames. The standardized ISO 15552 mounting interface ensures strict dimensional interchangeability, allowing a seamless drop-in retrofit for existing ISO 15552 cylinders.
Equipped with a built-in magnet (-S), this 80 mm bore unit directly supports AirTAC CMSE reed and DMSE electronic position sensing. Field-adjustable air cushioning at both stroke ends allows you to tune the deceleration screw to soften hard end stops at high speeds, protecting the 90 mm stroke mechanism from impact wear.
Airtac SE80 Standard Cylinder SE80X90S Technical Specifications
| Model | Airtac SE80 Standard Cylinder SE80X90S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø80 mm |
| Stroke | 90 mm |
| Acting type | Double acting |
| Port size | PT3/8 |
| Rod thread | M20×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
| Max stroke | Up to 1500 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø80mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 2513 N | 2268 N |
| 0.7 MPa | 3519 N | — |
| Max (@1.0 MPa) | 513 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE80 Standard Cylinder SE80X90S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 80 | Bore size in mm. |
| ×90 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE80 Standard Cylinder SE80X90S Is Used
Carton Erector Jaws
Provides the 2513 N push force required to fold and seal heavy corrugated carton blanks during high-speed packaging lines.
Pallet Diverters
Handles lateral pallet redirection on roller conveyors, utilizing the 90 mm stroke and adjustable cushions to absorb kinetic energy smoothly.
Press Pin Insertion
Drives large dowel pins into steel assemblies, relying on the 2513 N extend force and the rigid 25 mm rod to maintain alignment under load.
Is the Airtac SE80 Standard Cylinder SE80X90S the Right Cylinder?
This 80 mm bore generates 2513 N push at 0.5 MPa. If your payload is lighter, stepping down to the 63 mm bore yields 1559 N push, while moving up to the 100 mm bore provides 3927 N for heavier loads. The PT3/8 port and M20x1.5 rod thread handle robust flow and side-load capacity. Since a plain SE cylinder cannot hold a load when air is exhausted or a valve is centered, integrate a BSE rod lock for fail-safe positioning. For ISO 15552 replacement, match the 80 mm bore, 90 mm stroke, PT3/8 port, and -S magnet requirement.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE80 Standard Cylinder SE80X90S FAQ
The SE80X90S delivers a push force of 2513 N and a pull force of 2268 N at 0.5 MPa. At 0.7 MPa, the push force reaches 3518 N, with a maximum push capacity of 513 kgf at 1.0 MPa. It operates at a speed range of 30-800 mm/s.
Yes, the SE80X90S is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting footprint and hardware interface of other ISO 15552 profile cylinders, making it a drop-in replacement. The built-in -S magnet also works seamlessly with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models usually ship in 3-4 days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE80 Standard Cylinder SE80X90S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.