
The AirTAC SEJ Adjustable Cylinder SEJ32X150-10 is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 10mm window, so this Ø32mm unit covers an effective stroke of 140–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X150-10 is a double-acting, double-rod ISO 15552 profile cylinder featuring a 10 mm mechanical stroke adjustment. A rod exits both ends, yielding identical annulus areas so output force stays equal in both directions at 345 N each way at 0.5 MPa. You can dial the retract end from 140 to 150 mm to fine-tune the machine stop.
This extruded aluminum barrel omits external tie rods for a clean profile. The back-rod stop screw sets your exact end position, which you lock down after commissioning. It uses adjustable air cushions at both ends to decelerate the 12 mm rod near stroke extremes, and this specific SKU lacks a magnet, so it does not support position sensors.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X150-10 |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 10 mm (140–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 10mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -10 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 10 mm retract window to match varying part heights on a pick-and-place head. The equal 345 N both-way force ensures consistent lift and lower dynamics.
Set precise 140-150 mm end positions for a light-duty press. The back-rod stop screw locks the exact depth, while the adjustable cushion protects the 12 mm rod at cycle end.
Quickly shift the retract stop during machine changeover for different product lengths. The double-rod design keeps force identical both ways across the adjusted range.
Verify the 10 mm adjustment window safely covers your positioning tolerance. If you need less force, the next bore down is unavailable in this ISO 15552 range, but if you need more power, stepping up to the 40 mm bore provides 528 N both ways at 0.5 MPa. If your end stop never changes after commissioning, a fixed-stroke SED cylinder is enough. For this 150 mm stroke, add external guides to handle side loads since the 12 mm rod needs radial protection.
This cylinder is dimensionally interchangeable per ISO 15552, so you can match it by verifying the 32 mm bore, 140-150 mm effective stroke, PT1/8 port, and mounting choice from the Basic, FA, LB, TC, FTC, TCM1, or TCM2 set. Note that the air cushion and stop screw only decelerate and set the mechanical end; they do not hold position on air loss, so specify an external rod lock for fail-safe holding.
Quick checklist
A stop screw on the back rod mechanically shortens the retract stroke over a 10 mm window. This gives you an effective stroke range of 140 to 150 mm, which you lock in place after setting your exact end position.
Because it is a double-rod cylinder, the force is equal in both directions. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.