
The AirTAC SEJ Adjustable Cylinder SEJ32X150-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø32mm unit covers an effective stroke of 50–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X150-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. A rod exits both ends, meaning the annulus area is identical in both directions, yielding an equal force of 345 N each way at 0.5 MPa. You can dial the retract end from 50mm up to the nominal 150mm stroke.
A stop screw on the back rod mechanically sets the end position, allowing you to fine-tune the stroke directly on the machine without changing hardware. The integrated -S magnet supports CMSE reed and DMSE electronic sensors for position feedback, while adjustable air cushions at both ends manage deceleration.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X150-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 100 mm (50–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 50-150mm reach during commissioning to seat bearings precisely, leveraging the 345N both-way force without swapping physical spacers.
Adjust the retract stop on the fly to accommodate different product heights on a single packaging line, locking the back-rod screw once the ideal position is set.
Test multiple end-of-stroke destinations for a gripper during machine changeover, using the equal extend and retract speeds to maintain smooth part transfer.
Verify the 100mm adjustment window covers your required end-position range. If you need less force, stepping down is not possible as 32mm is the smallest ISO 15552 bore. If you need more power, the next size up is the 40mm bore, which provides 528 N both ways at 0.5 MPa. If your application never requires stroke changes, a fixed-stroke SED cylinder is sufficient. Remember that the adjustable cushion and stop screw decelerate the load but do not hold position on air loss; for fail-safe holding, use an external rod lock. Ensure your ISO 15552 replacement matches the 32mm bore, 150mm stroke, PT1/8 port, and magnet options.
Quick checklist
It features a 100mm adjustment window, meaning you can mechanically dial the retract stroke from a minimum of 50mm up to the nominal 150mm. You set the exact end position using a stop screw on the back rod and lock it down once tuned.
Because the rod exits both ends, the force is identical in both directions: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.