
The AirTAC SEJ Adjustable Cylinder SEJ32X150-20S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 20mm window, so this Ø32mm unit covers an effective stroke of 130–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X150-20S is a double-acting, double-rod ISO 15552 profile cylinder. A rod exits both ends, yielding identical annulus areas so output force is equal in both directions at 345 N at 0.5 MPa. The integrated -20 retract stop screw lets you mechanically dial the stroke down from 150 mm to a 130 mm minimum, giving an effective 130-150 mm range for exact positioning without hardware swaps.
This extruded-aluminum profile barrel omits external tie rods for a clean ISO 15552 dimensional interchange. Equipped with a -S magnet, it supports CMSE reed and DMSE electronic sensors for end-position confirmation. The field-adjustable air cushions at both ends provide precise deceleration near stroke extremes, while the PT1/8 ports and 12 mm rod keep the compact envelope intact.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X150-20S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 20 mm (130–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 20mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -20 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial in the exact 130-150 mm end position on small pneumatic presses, leveraging the 345 N both-way force for consistent workpiece crimping.
Adjust the retract stop on the fly to match different carton heights, using the 20 mm window to fine-tune the folding mechanism without swapping cylinders.
Precisely set the insertion depth of bearings or pins during assembly, relying on the equal double-rod force to prevent jamming in the fixture.
Verify the 20 mm adjustment window safely covers your required end-position variance, providing a 130-150 mm effective stroke. If your process needs less force, the adjacent bore down is 12 mm (not rated for this class), but if you need more power, stepping up to a 40 mm bore yields 528 N at 0.5 MPa. If the stroke never varies after commissioning, a fixed-stroke SED is sufficient. Remember that the stop screw and air cushions only set the mechanical end and decelerate; they do not hold position on air loss, so use an external rod lock for fail-safe holding. Since the 150 mm stroke is over 300 mm, ensure external guides manage side loads to protect the 12 mm rod.
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
The cylinder has a 20 mm adjustment window via a stop screw on the back rod. You can dial the retract stroke from the nominal 150 mm down to 130 mm to fine-tune the machine end position, then lock it in place.
Because the rod exits both ends, force is identical in both directions. It generates 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.