
The AirTAC SEJ Adjustable Cylinder SEJ32X150-50S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 50mm window, so this Ø32mm unit covers an effective stroke of 100–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X150-50S is a double-acting, double-rod ISO 15552 profile cylinder with a 50 mm adjustable stroke window, letting you dial the retract end from 100 mm up to 150 mm. A rod exits both ends, yielding identical force in both directions—about 345 N each way at 0.5 MPa.
This 32 mm bore uses a PT1/8 port and a Ø12 mm rod with an M10x1.25 thread. The included -S magnet enables precise position detection with CMSE reed or DMSE electronic sensors. You also get field-adjustable air cushions at both ends to manage deceleration, and a mechanical stop screw on the back rod to lock your final position after fine-tuning.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X150-50S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 50 mm (100–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 50mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -50 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 50 mm retract window to match varying PCB thicknesses during test probe descent, using the 345 N both-way force to lift the probe cleanly without bending components.
Quickly shift the effective stroke from 100 to 150 mm when switching a packaging line to a different carton size, locking the back-rod stop screw once the flap fold position is set.
Fine-tune the pressing depth of small bearings on an electronics assembly line, relying on the DMSE electronic sensor to confirm the exact adjusted end-position before retraction.
Verify the 50 mm adjustment window covers your required end-position range. If you need less force, the smaller 32 mm bore here is the baseline, but if you need to step up, the next larger 40 mm bore provides 528 N both ways at 0.5 MPa. If your application never requires stroke changes, a fixed-stroke SED saves complexity.
This cylinder is dimensionally interchangeable per ISO 15552—match the 150 mm stroke, 50 mm window, PT1/8 port, and mounting choice (Basic, FA, LB, TC, FTC, TCM1, or TCM2). Note that the stop screw and air cushions only set the mechanical end and decelerate the load; they do not hold position on air loss. For fail-safe holding, use an external rod lock.
AirtacDistr lists every SEJ32 order code with its price on one page at https://airtacdistr.com/products/airtac-sej32-adjustable-cylinder
Quick checklist
A stop screw on the rear rod lets you mechanically shorten the retract stroke by up to 50 mm. This gives an effective stroke range of 100 to 150 mm, which you lock in place during commissioning to hit an exact end-position.
Because it is a double-rod cylinder, force is equal both ways: 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa. The operating speed ranges from 30 to 800 mm/s.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.