
The AirTAC SEJ Adjustable Cylinder SEJ32X150-75S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 75mm window, so this Ø32mm unit covers an effective stroke of 75–150mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ32X150-75S is a double-acting, double-rod ISO 15552 profile cylinder with a 75 mm adjustable stroke window. A rod exits both ends, yielding identical annulus areas so thrust is equal in both directions at 345 N each way at 0.5 MPa. The effective stroke range dials from 75 mm up to 150 mm via a stop screw on the back rod.
This unit includes a magnet for CMSE reed or DMSE electronic sensors. It features an extruded aluminum barrel without external tie rods, adjustable air cushions at both ends, a PT1/8 port, and a 12 mm rod with an M10x1.25 thread. The cushion decelerates the load near the end of travel but does not lock the rod.
| Model | Airtac SEJ Adjustable Cylinder SEJ32X150-75S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø32 mm |
| Nominal stroke | 150 mm |
| Adjustment window | 75 mm (75–150 mm) |
| Configuration | Double rod, double acting |
| Port size | PT1/8 |
| Rod thread | M10×1.25 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 75mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 346 N |
| 0.7 MPa | 484 N |
| Max (@1.0 MPa) | 70 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 32 | Bore size in mm. |
| ×150 | Nominal stroke length in mm. |
| -75 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 75 mm retract window to match varying part heights on a pick-and-place unit, using the equal 345 N both-way force to grip and release without thrust imbalance.
Adjust the end position on a conveyor diverter gate between 75 mm and 150 mm during product changeover, locking the back-rod stop screw once the reject distance is set.
Fine-tune the exact engagement depth of a testing probe against a sample, using the 32 mm bore's 30-800 mm/s speed range and field-adjustable air cushions to prevent end-impact bounce.
This 32 mm bore generates 345 N both ways at 0.5 MPa. If your application needs less force, there is no smaller standard SEJ bore. If you need more thrust, step up to the 40 mm bore which provides 528 N each way at 0.5 MPa. The 75 mm adjustment window is ideal for commissioning a machine where the exact retract stop must be dialed in on-site. If you require a fixed end position without mechanical adjustment, a standard SED double-rod cylinder is sufficient. A plain SEJ does not hold position on air loss; for fail-safe holding, use an external rod lock. Since the stroke is 150 mm, ensure external guides support any side loads.
Quick checklist
A stop screw on the rear rod mechanically shortens the retract stroke over a 75 mm window. You can dial the effective stroke from 75 mm up to the nominal 150 mm, then lock the screw in place for precise end-position tuning.
Because the rod exits both ends, the annulus area is identical in both directions. It delivers 345 N at 0.5 MPa, 483 N at 0.7 MPa, and a maximum of 70 kgf at 1.0 MPa in both extend and retract.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.