
The AirTAC SEJ Adjustable Cylinder SEJ63X250-100S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 100mm window, so this Ø63mm unit covers an effective stroke of 150–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X250-100S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 100mm adjustable stroke window. You can mechanically dial the retract end from 150mm up to 250mm to perfectly match a stop or sensor target without machining new hardware. Because a rod exits both ends, the annulus area is symmetrical, yielding equal force and speed in both directions—1402 N each way at 0.5 MPa.
This unit includes a magnet for position sensing with CMSE reed or DMSE electronic switches. The extruded aluminum barrel omits external tie rods for a clean ISO 15552 profile, and field-adjustable air cushions at both ends decelerate the 30-800 mm/s travel near the stroke ends without acting as a mechanical lock.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X250-100S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 100 mm (150–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 100mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -100 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Delivers 1402 N both ways to push stock into a press, using the 100mm retract window to fine-tune the exact feed length during setup.
Handles automated clamping where the 150-250mm effective stroke range quickly adapts to different part heights without swapping cylinders.
The rear rod carries a cam for DMSE sensors, allowing technicians to mechanically shift the end position 100mm to align with a new inspection probe.
This 63mm bore gives 1402 N both ways at 0.5 MPa (1962 N at 0.7 MPa, max 286 kgf at 1.0 MPa). If your load requires less force, step down to the 50mm bore (825 N at 0.5 MPa); if you need more thrust, step up to the 80mm bore (2268 N at 0.5 MPa). The 100mm adjustment window is ideal for dialing in exact end positions during commissioning, but if your application never changes stroke, a fixed-stroke SED is simpler.
A plain SEJ does not hold position on air loss—the stop screw and cushions only set the mechanical end and decelerate, they are not a brake. For fail-safe holding, use an external rod lock. As stroke is 250mm, ensure external guides manage side loads to prevent rod binding. For ISO 15552 replacement, match the 63mm bore, 250mm stroke, PT3/8 port, and your mounting choice from Basic, FA, LB, TC, FTC, TCM1, or TCM2.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
The 100mm adjustment window lets you mechanically dial the retract stroke from 150mm up to 250mm. You set the position with a stop screw on the back rod and lock it in place on the machine.
Because the double-rod design has equal annulus area both ways, it outputs 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa in both extend and retract directions.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.