
The AirTAC SEJ Adjustable Cylinder SEJ63X250-30S is a genuine double-acting ISO 15552 double-rod cylinder with a mechanically ADJUSTABLE stroke: a back-rod stop screw lets you fine-tune the retract end over a 30mm window, so this Ø63mm unit covers an effective stroke of 220–250mm without changing cylinders. Force is equal in both directions.
The AirTAC SEJ63X250-30S is a double-acting, double-rod ISO 15552 profile cylinder featuring a 30mm adjustable stroke window. You can dial the retract end from 220mm to 250mm to perfectly match a machine stop.
This extruded aluminum barrel design includes a built-in magnet (-S) for CMSE reed or DMSE electronic sensors. Field-adjustable air cushions at both ends decelerate the payload near stroke end, while the back-rod stop screw lets you lock the final end-position during commissioning.
| Model | Airtac SEJ Adjustable Cylinder SEJ63X250-30S |
|---|---|
| Series | SEJ ISO 15552 adjustable-stroke cylinder |
| Bore size | Ø63 mm |
| Nominal stroke | 250 mm |
| Adjustment window | 30 mm (220–250 mm) |
| Configuration | Double rod, double acting |
| Port size | PT3/8 |
| Rod thread | M16×1.5 |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 36 mm |
Specifications follow the official AirTAC SEJ datasheet and ISO 15552 / VDMA 24562 dimensions. The adjustment screw shortens the retract end only; do not exceed the 30mm window. Port options: PT (standard) / G (BSPP).
| Pressure | Force (both directions) |
|---|---|
| 0.5 MPa | 1402 N |
| 0.7 MPa | 1962 N |
| Max (@1.0 MPa) | 286 kgf |
A rod exits both ends, so extend and retract force are identical. Actual usable force is lower than theoretical; size with a safety margin.
| SEJ | ISO 15552 double-rod double-acting cylinder with adjustable stroke. |
|---|---|
| 63 | Bore size in mm. |
| ×250 | Nominal stroke length in mm. |
| -30 | Adjustment stroke window in mm (options: 10/20/30/40/50/75/100). |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting (SEJ): Basic, LB, FA, TC, FTC, TCM1, TCM2. Related: SED (double rod, fixed stroke), SE (single rod).
Dial the 220-250mm retract position to set precise bending depths, utilizing the 1962 N both-way force at 0.7 MPa to hold heavy material stops.
Fine-tune the diverter stroke during product changeovers to accommodate different carton lengths without swapping hardware.
Incrementally adjust the end position during prototype runs to find the exact engagement distance for pressing bearings.
Confirm the 30mm adjustment window covers your required end-position range. If you need less force, the 50mm bore provides 825 N both ways at 0.5 MPa; if you need more, step up to the 80mm bore for 2268 N. If your stroke is fixed and never needs fine-tuning, a standard SED double-rod cylinder is sufficient.
This plain SEJ does not hold position on air loss; the adjustable cushion only decelerates near the end of travel, so use an external rod lock for fail-safe holding. As a 250mm stroke exceeds 300mm? No, but for longer 300mm+ setups, always use external guides to prevent side-load wear. This PT3/8 ported cylinder is dimensionally interchangeable per ISO 15552.
AirtacDistr lists every SEJ63 order code with its price on one page at https://airtacdistr.com/products/airtac-sej63-adjustable-cylinder
Quick checklist
A stop screw on the back rod lets you mechanically shorten the retract stroke by up to 30mm. The effective stroke range is 220mm to 250mm, which you lock in place after setting.
Because it is a double-rod cylinder, force is equal in both directions: 1402 N at 0.5 MPa, 1962 N at 0.7 MPa, and a maximum of 286 kgf at 1.0 MPa.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity and destination. We confirm price, availability and lead time — usually within 7 hours.