This model is discontinued
AirTAC has phased out the SI series. You can still order this code here: we ship the direct replacement SAIJ32X200-10S, with the same bore, stroke, output force, port and mounting, so it fits the same application. The SAI replacement keeps the same ISO 15552 mounting interface, bore, stroke, output force and accessories, so it drops straight into existing fixtures. It is the current-production version of this cylinder with an upgraded piston seal.
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-10S
The AirTAC SIJ32 Double Rod Adjustable Cylinder SIJ32X200-10S is a double-acting ISO 15552 (orig. ISO 6431) profile-barrel cylinder with a Ø32mm bore and 200mm stroke, G1/8 air ports and adjustable end cushioning. This model is discontinued — the direct replacement is the SAIJ32X200-10S, which matches its ISO interface, bore, stroke, force and mounting.
- BoreØ32 mm
- Stroke200 mm
- Port sizeG1/8
- Acting typeDouble acting
- Rod threadM10×1.25
- StatusDiscontinued → SAIJ32X200-10S
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-10S
The AirTAC SIJ32X200-10S is a discontinued double-acting double-rod ISO 15552 adjustable-stroke cylinder with a 32mm bore and 200mm nominal stroke. An external stop screw lets you trim the extend stroke by up to 10mm on-site, yielding a usable 190-200mm extension. The direct replacement is the SAIJ32X200-10S, matching the G1/8 port, M10x1.25 rod thread, and 27mm adjustable cushions. The stop screw sets the end position but is not a load lock.
The SAIJ successor retains the ISO 15552 mounting interface for hardware reuse but upgrades the piston seal to two Y-shaped one-way elements for lower start-up pressure and longer life. The -S suffix indicates a built-in piston magnet for legacy CS1-B/DS1-B switches.
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-10S Technical Specifications
| Model | Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-10S |
|---|---|
| Series | SI ISO 15552 profile cylinder (discontinued) |
| Replacement | SAIJ32X200-10S |
| Bore size | Ø32 mm |
| Stroke | 200 mm |
| Acting type | Double acting |
| Port size | G1/8 |
| Rod thread | M10×1.25 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 27 mm |
| Max standard stroke | Up to 1000 mm |
Specifications follow the official AirTAC SI datasheet (now discontinued). The SAIJ32X200-10S carries the same ISO 15552 ratings. Confirm against the product label before installation. Thread options: PT / G / NPT.
Theoretical Output Force (Ø32mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 402 N | 346 N |
| 0.7 MPa | 563 N | — |
| Max (@1.0 MPa) | 82 kgf | |
The SAIJ32X200-10S produces the same force from the same bore. Actual usable force is lower than theoretical; size with a margin.
Model Code: Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-10S
| SI | ISO 15552 profile-barrel cylinder (discontinued). |
|---|---|
| 32 | Bore size in mm. |
| ×200 | Stroke length in mm. |
| -S | Optional built-in magnet for sensor position sensing. |
Legacy SI-family variants: SID (double rod), SIJ (adjustable stroke) — each maps to its SAI equivalent (SID→SAID, SIJ→SAIJ). Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B).
Where the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-10S Is Used
Micro-Positioning Press
Dialing in a precise 193mm extend endpoint on a small assembly press by trimming up to 10mm off the 200mm nominal stroke, avoiding machined hard-stops.
Variable Length Diverter
Tuning a lane diverter arm on-site to match slight package size variations without swapping the entire cylinder body.
Adjustable Parts Ejector
Setting exact ejection reach for different mold depths, using the external stop screw to safely shorten the extend stroke by the exact 7mm offset required.
Replacing the Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-10S with the SAIJ32X200-10S
To replace the discontinued SIJ32X200-10S, order the SAIJ32X200-10S direct. It preserves the 32mm bore, 200mm nominal stroke, 10mm adjust window, and G1/8 port. Choose the 10mm adjust window if you only need micro-trimming of the extend stroke. Mounting options include Basic, FA, LB, and TC. The -S suffix ensures piston magnet compatibility for legacy CS1-B/DS1-B sensors. For stroke lengths >=300mm, verify side-load limits to prevent rod bending. Remember, the stop screw sets end position and does not hold loads on air loss; for held loads use SAIL/BSAI or an external rod lock.
Replacement checklist
- ✓ Same ISO 15552 interface → SAIJ32X200-10S
- ✓ Same bore / stroke / force
- ✓ Port/thread type (PT/G/NPT)
- ✓ Magnet (-S) for sensors?
- ✓ Mounting reused (FA/FB/CA/CB/CR/LB/TC)
Airtac SIJ32 Double Rod Adjustable Cylinder SIJ32X200-10S FAQ
Yes, the SIJ32X200-10S is discontinued. The direct replacement is the SAIJ32X200-10S. It shares the same ISO 15552 interface, 32mm bore, 200mm nominal stroke, 10mm adjust window, G1/8 port, and mounting options, but features an upgraded piston seal.
The external stop screw provides a 10mm adjust window, allowing the extend stroke to be shortened on-site from 200mm down to 190mm.
Related AirTAC SAI Cylinders
Request a Quote for the SAIJ32X200-10S
Send us the quantity and destination. We confirm price, stock and lead time on the SAIJ32X200-10S replacement — usually within 7-8 hours.