
The AirTAC 4V100 Solenoid Valve 4V120M5F is a genuine 5/2-way double solenoid (memory) solenoid valve with M5 ports and an effective area of 10.2 mm² (Cv 0.6). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The AirTAC 4V120-M5F is a 5/2-way double-solenoid directional control valve built on the compact 4V100 body. It directs compressed air to double-acting cylinders and actuators, and because it uses two solenoids with no return spring, the spool stays in its last pulsed position even when power is removed—a true memory function held by spool friction and balanced pressure, not magnetism. With M5 threaded ports and a DC12V coil drawing just 2.5 W, it’s a lightweight 175 g solution for space-constrained pneumatic circuits.
This valve delivers an effective area of 10.2 mm² (Cv 0.6, catalog figure for the 4V110-06) and can cycle up to 5 times per second. It operates on filtered air from 0.15-0.8 MPa and responds in 0.05 s or less. The IP65-rated aluminum body, manual override, and compatibility with manifold bases make it a practical choice for benchtop automation where holding the last actuator position without constant power is a design requirement.
| Model | Airtac 4V100 Solenoid Valve 4V120M5F |
|---|---|
| Series | 4V100 solenoid valve (spool type) |
| Valve type | 5/2-way |
| Function | Double solenoid (memory) |
| Port size | M5 |
| Exhaust port | M5 |
| Effective area (Cv) | 10.2 mm² (Cv 0.6) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 5 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 175 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 10.2 mm² |
|---|---|
| Flow coefficient | Cv 0.6 |
| Response time | ≤ 0.05 s |
| Coil power | AC 3.5 VA · DC24V 2.8 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 1 | Body size (4V100) — sets port & flow. |
| 2 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -M5 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V110 (single), 4V120 (double), 4V130C/E/P (5/3 center). Add the voltage suffix when ordering.
The memory function holds a gripper closed on a part after a short pulse, allowing the control system to power down the solenoid between moves. This saves energy and reduces heat build-up in the 2.5 W DC12V coil during repetitive benchtop pick-and-place cycles.
In analytical instruments, a 4V120-M5F can actuate a small slide gate or diverter. The double-solenoid memory ensures the gate stays in its last commanded position during a system power cycle, preventing sample cross-contamination without needing a spring-return default.
Use this valve to drive the stop-pin cylinder on a small rotary indexer. A pulse to one solenoid extends the pin, a pulse to the other retracts it. The M5 ports fit neatly with 4 mm push-in fittings, keeping the pneumatic layout tidy inside a small machine frame.
Choose the 4V120-M5F when your application needs a compact, double-solenoid valve that retains its position after a signal pulse, eliminating the need for a continuous holding current. Its M5 ports and Cv 0.6 (catalog figure for the 4V110-06) flow capacity suit small-bore double-acting cylinders roughly in the Ø16-25 mm range. If your cylinder is larger or you need faster filling, stepping up to a 4V200-series valve (Cv 1.0) with 1/8" or 1/4" ports will provide the extra flow.
For replacement, match all five points: the 4V100 body size, the 5/2 double-solenoid (memory) function, the M5 port size, the DC12V coil voltage, and the standard terminal-box electrical entry. This valve can be used as a single unit or ganged on a 4V100 manifold base. If your control logic requires the cylinder to go to a known safe state on power loss rather than hold, consider a single-solenoid spring-return model (4V110) instead.
Quick checklist
The spool will remain in its last pulsed position, so the valve will not shift on its own. However, this is not a safety-rated holding function—normal internal leakage means a cylinder can drift over time, especially under an external load. For any suspended or vertical load that must not move, you must add a pilot-operated check valve or a mechanical brake at the cylinder ports.
Yes, the coil is rated for DC12V and consumes 2.5 W (about 0.21 A). It is designed for direct switching from a PLC transistor output or a relay. Ensure your power supply can handle the inrush and that you use a flyback diode across the coil to protect your controller from voltage spikes when the solenoid de-energises.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.