
The AirTAC 4V230E-06 Solenoid Valve, 4V200 Series (4V230E06B-AM) is a genuine 5/3-way 5/3 double solenoid — exhaust center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V230E06B-AM is a 5/3-way double solenoid pilot valve from AirTAC's 4V200 family, built here with a DC24V AMISCO solenoid coil and wired through a terminal box. Its exhaust-center design is the defining feature: when neither solenoid is energised, the cylinder ports vent to atmosphere while supply is blocked, so a double-acting cylinder coasts freely and can be repositioned by hand or by external force. This makes it the natural choice for slides and grippers that must not fight the valve in the neutral state.
Flow sits in the mid-body 4V200 class with an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) and a maximum cycling rate of 3 cycles per second, a good match for double-acting cylinders in the ~O32-50 mm range. The valve weighs 360 g, responds in 0.05 s or less, carries an IP65 rating and needs no lubrication. Note that because the coil is the factory AMISCO option, you should confirm its exact electrical rating with us when planning your power budget.
| Model | AirTAC 4V230E-06 Solenoid Valve, 4V200 Series (4V230E06B-AM) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Exhaust center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
Exhaust-center neutral lets operators slide or re-seat a double-acting cylinder by hand between clamping cycles, without back-pressure fighting the movement.
On packaging lines, a float-neutral pusher can be cleared of jams manually with the valve de-energised, cutting downtime on a Cv 0.8 (catalog figure for the 4V230C-08) mid-flow circuit.
Mounted on an integrated base, this DC24V terminal-box valve slots into a manifold group feeding ~O32-50 mm bores across an automation station.
Choose this valve when your cylinder must float free in the neutral position. If you need the cylinder to freeze in place instead, pick the closed-center 4V230C; if both cylinder sides should stay pressurised, the pressure-center 4V230P is the right variant. For a smaller bore or slower cycle the 4V100 (Cv 0.6) may suffice, while larger bores or faster cycling call for the 4V300 at Cv 1.65. A single valve body suits one actuator; a base-mounted manifold group saves wiring and plumbing on multi-station machines.
Ordering a replacement? Match five points exactly: the 4V200 body size, the function (30E exhaust center here), the 1/8in port with PT taper thread (G and NPT versions exist), the DC24V coil voltage, and the terminal electrical entry. Adding the -AM suffix as on this part specifies the AMISCO coil.
Quick checklist
It is a 5/3-way valve for double-acting cylinders and pneumatic actuators, delivering an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) with up to 3 cycles per second. That capacity suits bores of roughly O32-50 mm; single-acting cylinders would need a 3/2 valve instead. For load-hanging duties, remember the exhaust center lets the cylinder drift, so add a pilot-operated check valve or mechanical brake if positive holding is required.
The -AM option fits an AMISCO (Italian) solenoid coil on the DC24V valve; the body, ports and flow performance are unchanged, but you should confirm the AMISCO coil's exact wattage with us before sizing your power supply. Exhaust center means that at rest both cylinder ports vent, so the load floats free - ideal for slides that get repositioned by hand, and the wrong choice if you need the load frozen in place (that is the closed-center 4V230C).
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Most standard models are dispatched in 3-5 days.
Most inquiries answered within 7 hours.
Send us the quantity, coil voltage and destination. We confirm price, availability and lead time — usually within 7 hours.