
The AirTAC 4V230P-06F Solenoid Valve, 5/3-way, pressure center, PT1/8, DC12V, terminal entry (4V230P06F) is a genuine 5/3-way 5/3 double solenoid — pressure center solenoid valve with PT1/8 ports and an effective area of 13.6 mm² (Cv 0.8). It is an internally piloted spool valve that directs compressed air to double-acting cylinders and actuators.
The 4V230P-06F directs compressed air to double-acting cylinders and actuators with a 5/3-way, pressure-center spool configuration. When both solenoids are de-energised, the valve’s center position applies supply pressure to both cylinder ports simultaneously, creating a balanced force that helps resist external movement—useful for applications where the load must be kept under pressure at mid-stroke without full locking.
This model is built on the 4V200 body with 1/8in PT ports and a DC12V coil drawing just 2.5 W. Its effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08) and a maximum cycling rate of 3 cycles per second make it a good match for mid-size double-acting cylinders in the ~O32-50 mm bore range. The aluminum-alloy body weighs 360 g, carries an IP65 protection rating, and includes a manual override for direct spool actuation during setup.
| Model | AirTAC 4V230P-06F Solenoid Valve, 5/3-way, pressure center, PT1/8, DC12V, terminal entry (4V230P06F) |
|---|---|
| Series | 4V200 solenoid valve (spool type) |
| Valve type | 5/3-way |
| Function | 5/3 double solenoid — Pressure center |
| Port size | PT1/8 |
| Exhaust port | PT1/8 |
| Effective area (Cv) | 13.6 mm² (Cv 0.8) |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Pilot type | Internal / external pilot |
| Operating pressure | 0.15 – 0.8 MPa |
| Proof pressure | 1.2 MPa |
| Max frequency | 3 cycle/sec |
| Response time | ≤ 0.05 s (activating) |
| Temperature | -20 to +70 °C |
| Body material | Aluminum alloy |
| Weight | 360 g |
Specifications follow the official AirTAC 4V series datasheet. Lubrication not required. Confirm coil voltage and thread (PT / NPT / G) against the product label before wiring.
| Effective area | 13.6 mm² |
|---|---|
| Flow coefficient | Cv 0.8 |
| Response time | ≤ 0.05 s |
| Coil power | AC 4.5 VA · DC24V 3.0 W · DC12V 2.5 W |
| Protection / insulation | IP65 (DIN40050), B-class |
| Voltage options | DC24V, DC12V, AC110V, AC220V |
| Manual override | Yes (locking / non-locking) |
Size the valve so effective area / Cv is not the bottleneck for your cylinder bore and speed. Undersized valves slow the actuator. Note 5/3 (center) versions have a smaller effective area than the 5/2 of the same body size.
| 4V | Solenoid valve, spool type, 4-series. |
|---|---|
| 2 | Body size (4V200) — sets port & flow. |
| 3 | Function: 1 = single 5/2, 2 = double 5/2, 3 = 5/3. |
| -06 | Port thread: M5 / 06=1/8" / 08=1/4" / 10=3/8" / 15=1/2". |
Related: 4V210 (single), 4V220 (double), 4V230C/E/P (5/3 center). Add the voltage suffix when ordering.
The pressure-center position keeps both sides of a double-acting cylinder pressurised at rest, maintaining a light, balanced clamping force on parts without requiring constant solenoid energisation.
In pick-and-place or pressing operations, the 4V230P-06F holds the actuator under pressure mid-stroke, resisting movement from tooling weight while the next sequence step is prepared.
Controls a double-acting diverter gate that must stay pressured in its center position to hold back product flow, then shift fully open or closed with a pulsed signal to either solenoid.
Choose the 4V230P-06F when your pneumatic circuit needs a 5/3 pressure-center function on a 1/8in ported base. The pressure-center spool pressurises both sides of the cylinder at rest, which can help counteract a light external force without drifting to an exhaust state. If the cylinder is small (under O32 bore) and speed is the priority, the 4V100 series with its smaller Cv 0.6 may be a lighter, more compact fit. For larger bores or faster stroke times, step up to the 4V300 body (Cv 1.65) to avoid flow restriction.
When replacing an existing valve, match five points: confirm the 4V200 body size, verify the 5/3 pressure-center function, check that the 1/8in PT thread matches your plumbing, ensure the coil is rated for DC12V, and note the terminal-box electrical entry. This valve can be used as a single unit or ganged on a manifold base for multi-cylinder stations.
Quick checklist
With an effective area of 13.6 mm2 (Cv 0.8, catalog figure for the 4V230C-08), this 5/3 valve suits double-acting cylinders roughly in the O32 to O50 mm bore range. It is not intended for very small cylinders (where a 4V100 would be more responsive) or large, high-speed actuators that need the higher Cv 1.65 of the 4V300 series.
The spool returns to its center position and supply pressure is routed to both cylinder ports (A and B) while the exhaust ports are blocked. This pressurises both sides of the piston, creating a balanced force. It is not a safety lock; for true load holding, add a pilot-operated check valve at the cylinder ports.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity, coil voltage and destination. We confirm price, stock and lead time — usually within 7-8 hours.