Airtac SE50 Standard Cylinder SE50AX30
The AirTAC SE50 Standard Cylinder SE50AX30 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 30mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke30 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50AX30
The AirTAC SE50AX30 is a double-acting single-rod ISO 15552 profile cylinder engineered for short-stroke actuation. It delivers 982 N of push force at 0.5 MPa and utilizes a 30 mm stroke. This specific SKU features a SUS420J2 stainless steel rod (option A), making it highly suitable for corrosive or washdown environments where a standard carbon steel piston rod would degrade.
The extruded aluminum barrel design omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration via a set screw, protecting machinery from harsh mechanical impacts. Note that this unit lacks a built-in position magnet, so it cannot host CMSE or DMSE sensors without modification.
Airtac SE50 Standard Cylinder SE50AX30 Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50AX30 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 30 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50AX30
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×30 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50AX30 Is Used
Pouch Sealing Jaws
Drives the short 30 mm jaw closure on continuous-flow packaging lines, using the 982 N push force to crimp seals through multi-layer barrier films.
Lab Sample Diverters
Leverages the SUS420J2 stainless steel rod to withstand frequent chemical wipe-downs while actuating sample routing gates in diagnostic equipment.
CNC Chuck Ejectors
Provides a compact 30 mm kick to eject finished machined parts from lathe chucks, utilizing the adjustable cushion to protect spindle bearings.
Is the Airtac SE50 Standard Cylinder SE50AX30 the Right Cylinder?
When sizing this actuator, consider stepping down to a 40 mm bore (providing 628 N push at 0.5 MPa) for lighter loads, or moving up to a 63 mm bore (delivering 1559 N push at 0.5 MPa) if your payload demands greater thrust. Because this is a standard double-acting cylinder, it will not hold a load if air pressure is lost or the valve is centered; the piston will drift. For position-holding safety, explore the BSE rod-lock variant. As a true ISO 15552 profile cylinder, it offers a direct replacement footprint for standardized mounting hardware across various brands.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50AX30 FAQ
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa.
Yes. The SE50AX30 is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting interface and PT1/4 port locations of other standardized profile cylinders, allowing for a direct retrofit.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50AX30
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.