Airtac SE50 Standard Cylinder SE50AX60
The AirTAC SE50 Standard Cylinder SE50AX60 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 60mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke60 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50AX60
The AirTAC SE50AX60 is a double-acting ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. It features a 50 mm bore, a 60 mm stroke, and a PT1/4 port. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting corrosion.
This specific SKU is built with a SUS420J2 stainless steel rod (code A) for corrosive and washdown environments. The barrel includes sensor grooves on three sides, though this unit lacks the built-in magnet (-S) required for AirTAC CMSE or DMSE position sensing. Field-adjustable pneumatic cushioning at both ends allows you to fine-tune end-of-stroke deceleration for moving loads.
Airtac SE50 Standard Cylinder SE50AX60 Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50AX60 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50AX60
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50AX60 Is Used
Flow Wrapper Film Sealing
Drives the sealing jaw on a horizontal flow wrapper, utilizing the 982 N push force and 60 mm stroke to cleanly crimp packaging film in washdown food lines.
Diverter Gate Actuation
Pivots a sorting flap on a logistics conveyor, where the SUS420J2 stainless rod resists ambient moisture and the short 60 mm stroke provides rapid routing.
Bottle Capping Head
Lowers a capping chuck onto plastic bottles in a beverage plant, applying precise torque via the 50 mm bore while the corrosion-resistant rod survives daily washdowns.
Is the Airtac SE50 Standard Cylinder SE50AX60 the Right Cylinder?
Delivering 982 N push at 0.5 MPa, this 50 mm bore fits neatly between the 40 mm bore (628 N push) and the 63 mm bore (1559 N push) for scaling force up or down. Because it is a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, matching standard mounting accessories. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold a load. If your application requires position holding without live air pressure, consider the BSE rod-lock variant. To add position sensing, select an SE50X60-S model to enable CMSE reed and DMSE electronic switches.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50AX60 FAQ
At 0.5 MPa, the SE50AX60 generates 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, allowing it to drop into existing footprints and use standard mounting hardware. However, this specific SKU lacks the built-in magnet (-S) and cannot support AirTAC CMSE or DMSE sensors without modifying the order code.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50AX60
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.