Airtac SE50 Standard Cylinder SE50AX600
The AirTAC SE50 Standard Cylinder SE50AX600 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 600mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke600 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50AX600
The AirTAC SE50AX600 is a double-acting single-rod profile cylinder built to the ISO 15552 / VDMA 24562 standard. It delivers a theoretical push force of 982 N at 0.5 MPa and a pull force of 825 N. This specific configuration features a 600 mm stroke and a SUS420J2 stainless steel rod, making it highly suitable for corrosive or washdown environments where a standard carbon steel rod would degrade.
The extruded aluminum barrel design omits external tie rods, yielding a smooth, compact profile that resists dirt accumulation and allows for flush mounting. Pneumatic cushioning at both ends is field-adjustable via a screw, letting technicians precisely tune end-of-stroke deceleration to prevent hard impacts at high cycle rates. Note this SKU lacks a built-in magnet, so it does not support CMSE or DMSE position sensors without modification.
Airtac SE50 Standard Cylinder SE50AX600 Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50AX600 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50AX600
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50AX600 Is Used
Food Grade Conveyor Diverting
The SUS420J2 stainless rod withstands washdown, while the 982 N push force easily redirects heavy packaged goods along a 600 mm travel path.
Long-Stroke Press Deflashing
Utilizing the full 600 mm extension, this cylinder strips flash from deep-drawn metal parts, relying on adjustable end cushions to soften the stopping force.
Pharmaceutical Dispense Head
The corrosion-resistant rod material and smooth ISO 15552 tie-rod-free barrel profile prevent contaminant traps in sterile dosing machinery.
Is the Airtac SE50 Standard Cylinder SE50AX600 the Right Cylinder?
This 50 mm bore provides 982 N push at 0.5 MPa. If your application requires less force, the neighbouring 40 mm bore yields 628 N push, whereas stepping up to the 63 mm bore provides 1559 N push for heavier payloads. Because the 600 mm stroke is substantial, the unsupported piston rod is highly susceptible to bending under lateral loads; always use an external guide rail to prevent rod-bearing damage.
As a standard ISO 15552 cylinder, this unit is dimensionally interchangeable with other ISO 15552 profile cylinders, simplifying retrofits. It uses a PT1/4 port and a 20 mm diameter rod with an M16x1.5 thread. Remember that a standard double-acting cylinder drifts when air pressure is lost; if the machine must hold a vertical load safely without live pressure, integrate an external rod lock or a pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50AX600 FAQ
This 50 mm bore cylinder has a PT1/4 port. At 0.5 MPa it provides 982 N push and 825 N pull. At 0.7 MPa the push is 1374 N, and the maximum rated push is 200 kgf at 1.0 MPa.
No. The adjustable air cushions at both ends only decelerate the piston near the stroke ends; they are not locking mechanisms. The cylinder will drift if air pressure drops. Use an external rod lock or a BSE series cylinder for secure load holding.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50AX600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.