Airtac SE50 Standard Cylinder SE50AX60S
The AirTAC SE50 Standard Cylinder SE50AX60S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 60mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke60 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50AX60S
The AirTAC SE50AX60S is a double-acting single-rod ISO 15552 profile cylinder engineered for washdown and corrosive environments. By utilizing a SUS420J2 stainless steel rod (option A) alongside an extruded aluminum barrel, it eliminates external tie rods to provide a compact, flush-mounting body that resists contamination. Delivering a robust 982 N push at 0.5 MPa, this 50 mm bore unit is built for rigorous duty cycles.
Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration via a set screw, softening hard impacts when cycling at speeds up to 800 mm/s. Equipped with a built-in magnet (option S), the cylinder seamlessly integrates with AirTAC CMSE reed and DMSE electronic sensors for precise position feedback across its 60 mm stroke.
Airtac SE50 Standard Cylinder SE50AX60S Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50AX60S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50AX60S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50AX60S Is Used
Pouch Forming Jaws
Drives the sealing jaws on vertical form-fill-seal pouch machines, utilizing the 982 N push force and SUS420J2 rod to withstand frequent washdowns without pitting.
Bottle Divert Gate
Actuates a sorting diverter on a stainless steel conveyor line, relying on the 60 mm stroke and flush profile barrel to shift product lanes cleanly in tight spaces.
Lab Centrifuge Lid
Locks and opens the safety cover on a high-speed laboratory centrifuge, using the built-in magnet and DMSE electronic sensors to confirm safe closure before spin cycles.
Is the Airtac SE50 Standard Cylinder SE50AX60S the Right Cylinder?
Selecting this 50 mm bore makes sense when your application requires the 982 N push at 0.5 MPa. If you need less force, stepping down to the 40 mm bore yields 628 N of push, while stepping up to the 63 mm bore provides a substantial 1559 N. Because this is a plain double-acting cylinder, it cannot hold a load in place if air pressure is lost or the valve centers; the piston will drift. For gravity-loaded vertical setups requiring static holding, consider the AirTAC BSE rod-lock variant or an external pilot-operated check valve.
Dimensionally interchangeable per ISO 15552, this model serves as a direct replacement for other ISO 15552 cylinders, matching the 50 mm bore, 60 mm stroke, PT1/4 port, and standardized mounting accessory pattern. The integrated magnet enables direct sensor installation without altering the manifold layout.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50AX60S FAQ
The 50 mm bore delivers a push force of 982 N and a pull force of 825 N at 0.5 MPa. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, it is dimensionally interchangeable per ISO 15552, serving as a direct replacement matching the PT1/4 port and 50 mm footprint. However, it cannot hold a load without live air pressure; the adjustable air cushion only decelerates the piston near stroke end and does not function as a mechanical lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50AX60S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.