verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50AX650

The AirTAC SE50 Standard Cylinder SE50AX650 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 650mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke650 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$209.59 $217.09Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE50 Standard Cylinder SE50AX650

The AirTAC SE50AX650 is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 650 mm stroke. It features a SUS420J2 stainless steel piston rod (code A), making it highly suitable for corrosive environments or washdown duty. Operating at 0.15-1.0 MPa, it generates 982 N of push force and 825 N of pull force at 0.5 MPa, peaking at 200 kgf maximum push at 1.0 MPa.

Unlike traditional tie-rod designs, this actuator utilizes a square extruded aluminum barrel without external tie rods, yielding a compact, flush-mounting profile that resists corrosion and simplifies sensor placement across three integrated grooves. The field-adjustable air cushioning at both ends allows technicians to dial in end-of-stroke deceleration via a screw, softening hard impacts at operating speeds up to 800 mm/s. Because this specific SKU lacks the -S magnet option, it will not directly interface with AirTAC CMSE or DMSE position sensors without modification.

Airtac SE50 Standard Cylinder SE50AX650 Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50AX650
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke650 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50AX650

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×650Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50AX650 Is Used

packaging

Flow Wrapper End-Of-Line

Drives the cutting and sealing head on stainless food-grade flow wrappers, using the 982 N push force and 650 mm stroke to cycle packaging film precisely in washdown environments.

conveyor_belt

Bottling Line Divert Gate

Actuates routing gates on high-speed bottling conveyors, where the SUS420J2 stainless rod resists moisture and the 650 mm stroke clears wide product lanes.

science

Lab Sample Indexing Arm

Positions multi-tier sample carousels in analytical lab equipment, benefiting from the flush extruded barrel profile and smooth adjustable end cushions to protect delicate glassware.

Is the Airtac SE50 Standard Cylinder SE50AX650 the Right Cylinder?

Stepping down to a 40 mm bore yields 628 N of push at 0.5 MPa, whereas stepping up to a 63 mm bore provides 1559 N, giving you clear boundaries for resizing your pneumatic drive. The 650 mm stroke is a non-standard, made-to-order length exceeding the 50 mm bore's 1200 mm maximum standard stroke limit, so verify lead times. With a 650 mm stroke, the unsupported load risks rod-bearing bending; an external guide is strongly recommended to prevent side-load damage.

As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders, sharing standard FA, LB, or TC mounting hardware. Note that a plain SE cylinder does not hold its load when air is lost or exhausted—the piston drifts. For position holding without live pressure, consider the BSE rod lock variant. The PT1/4 port and M16x1.5 rod thread are fixed by the 50 mm bore.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50AX650 FAQ

The SE50AX650 delivers 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It uses a PT1/4 port and a M16x1.5 rod thread.

No, the standard SE profile cylinder does not lock or hold position when air is exhausted or the valve is centered; the piston will drift. The adjustable air cushion only decelerates the piston near stroke end and does not act as a brake. For true mechanical load holding, use the BSE rod lock variant.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50AX650

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE50AX650 and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.