Airtac SE50 Standard Cylinder SE50AX700
The AirTAC SE50 Standard Cylinder SE50AX700 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 700mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke700 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50AX700
The AirTAC SE50AX700 is a double-acting, single-rod ISO 15552 profile cylinder featuring a 50 mm bore and a 700 mm stroke. It generates 982 N of push force at 0.5 MPa and utilizes a SUS420J2 stainless steel rod (code A) to resist corrosion in washdown or chemically exposed environments. Because this specific SKU lacks the -S magnet code, it is not equipped for AirTAC CMSE or DMSE position sensing out of the box.
The extruded aluminum barrel design omits external tie rods, yielding a compact footprint that mounts flush against frames while exposing sensor grooves on three sides. Field-adjustable pneumatic cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts when cycling at speeds up to 800 mm/s.
Airtac SE50 Standard Cylinder SE50AX700 Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50AX700 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 700 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50AX700
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×700 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50AX700 Is Used
Bottling Line Diverter
Routes plastic bottles between filling lanes using the 982 N push force and 700 mm stroke, while the SUS420J2 rod withstands incidental moisture and washdown spray.
Corrugated Box Flap Folder
Extends 700 mm to fold large cardboard flaps on packaging machinery, relying on adjustable pneumatic cushions to soften the end stop during rapid 30-800 mm/s cycling.
Chemical Mixing Station Pivot
Pivots a dosing arm into a mixing vessel where the stainless steel rod provides necessary resistance to mild chemical exposure and ambient humidity.
Is the Airtac SE50 Standard Cylinder SE50AX700 the Right Cylinder?
This 50 mm bore yields 982 N push at 0.5 MPa. If your application requires less force, stepping down to a 40 mm bore provides 628 N push, whereas moving up to a 63 mm bore offers 1559 N push for heavier loads. As a standard double-acting cylinder, the SE does not hold its load if air pressure drops or the valve centers; for position holding you would need a BSE rod lock variant. Given the 700 mm stroke, the M16x1.5 rod and internal bearings face increased bending moments under side loads, making an external guide rail advisable to prevent premature wear.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50AX700 FAQ
The 50 mm bore provides 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum push of 200 kgf at 1.0 MPa. It uses a PT1/4 port and a 20 mm diameter rod with an M16x1.5 thread.
Yes, the SE profile cylinder is built to the ISO 15552 / VDMA 24562 standard, meaning its mounting footprint and dimensions are interchangeable with other ISO 15552 cylinders, simplifying retrofits and shared mounting hardware.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50AX700
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.