
The AirTAC SE50 Standard Cylinder SE50AX900S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 900mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50AX900S is a double-acting single-rod ISO 15552 profile cylinder engineered for demanding 900 mm stroke applications. It generates 982 N of push force at 0.5 MPa and features a SUS420J2 stainless steel rod for superior corrosion resistance in washdown or chemically exposed environments. Equipped with a built-in magnet, it supports direct mounting of CMSE reed and DMSE electronic sensors along the extruded aluminum barrel.
Unlike traditional tie-rod designs, the SE series utilizes a square extruded profile without external tie rods, allowing flush mounting on machine frames while providing sensor grooves on three sides for flexible positioning. The field-adjustable air cushion at both ends allows technicians to fine-tune end-of-stroke deceleration, absorbing kinetic energy smoothly rather than relying on a fixed rubber bumper.
| Model | Airtac SE50 Standard Cylinder SE50AX900S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 900 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×900 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Leveraging the 900 mm stroke and SUS420J2 stainless rod, this cylinder drives large-scale diverters on bottling lines, resisting washdown chemicals while reliably shifting containers between parallel conveyors.
The 982 N push force smoothly translates a precision spray head across a 900 mm path, while the adjustable pneumatic cushion ensures the delicate coating assembly decelerates without hard mechanical impacts.
Utilizing the built-in DMSE sensor magnet, automated strapping cells use this 50 mm bore actuator to position and eject palletized goods, confirming full extension before applying tension bands.
This 50 mm bore cylinder produces 982 N push at 0.5 MPa. If your application requires less force, stepping down to the 40 mm bore yields 628 N push, while stepping up to the 63 mm bore provides 1559 N push for heavier loads. Because the 900 mm stroke exceeds the standard 1200 mm maximum for this bore, it is supplied as a non-standard made-to-order configuration.
For a stroke of this length, the unsupported piston rod is highly susceptible to bending under side loads; an external guide rail or linear bearing is strongly recommended to prevent rod-bearing damage. Note that this standard SE cylinder will drift and cannot hold a load if air pressure is lost—use a BSE rod lock variant if mid-stroke position holding is required. As a true ISO 15552 cylinder, it is dimensionally interchangeable with other ISO 15552 profile cylinders and shares standard mounting accessories.
Quick checklist
At 0.5 MPa, the 50 mm bore provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N, with an absolute maximum push of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50AX900S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact mounting footprint and port sizes (PT1/4) of comparable profile cylinders. You can drop it into existing ISO 15552 mounting hardware without redesigning your frame.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.