Airtac SE50 Standard Cylinder SE50AX95S
The AirTAC SE50 Standard Cylinder SE50AX95S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 95mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke95 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50AX95S
The AirTAC SE50AX95S is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force at 0.5 MPa. It features a 50 mm bore, a 95 mm stroke, and a SUS420J2 stainless steel rod (code A) specifically chosen for corrosion resistance in washdown or chemically aggressive settings. The extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that resists debris buildup.
This unit comes equipped with a built-in magnet (code S) for position sensing with AirTAC CMSE reed or DMSE electronic switches. Field-adjustable pneumatic cushioning at both ends allows you to tune end-of-stroke deceleration, protecting payloads from hard impacts. Operating at 30-800 mm/s, it uses a PT1/4 port and an M16x1.5 rod thread to handle dynamic industrial loads.
Airtac SE50 Standard Cylinder SE50AX95S Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50AX95S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 95 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50AX95S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×95 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50AX95S Is Used
Stainless Steel Pouch Sealing
Leveraging the 982 N push force and SUS420J2 rod, this cylinder drives sealing jaws in food-grade packaging lines where washdown chemicals would corrode standard carbon steel.
Bottling Line Diverter Gate
The 95 mm stroke actuates routing gates on a beverage conveyor, using the built-in magnet with DMSE sensors to confirm gate position before high-speed bottle traffic arrives.
PCB Router Clamp
Provides precise clamping pressure for automated PCB routing machines, relying on the field-adjustable cushions to soften end-strokes and protect delicate fiberglass substrates.
Is the Airtac SE50 Standard Cylinder SE50AX95S the Right Cylinder?
If your application requires less force, stepping down to a 40 mm bore yields 628 N of push at 0.5 MPa, whereas moving up to a 63 mm bore provides 1559 N for heavier payloads. This 95 mm stroke falls below the 300 mm threshold, minimizing rod-bearing bending, but long unsupported loads still require an external guide. As a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, sharing standard mounting hardware. Note that the adjustable air cushion only decelerates the piston near stroke end; it does not hold the load if air pressure is lost. For position holding, consider a BSE rod lock.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50AX95S FAQ
At 0.5 MPa, the SE50AX95S provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa.
Yes. The SE50AX95S is dimensionally interchangeable per ISO 15552 standards, meaning it shares the exact same mounting footprint and port locations as other ISO 15552 profile cylinders. It uses a PT1/4 port and includes a built-in magnet compatible with AirTAC CMSE and DMSE sensors.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50AX95S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.