Airtac SE50 Standard Cylinder SE50BX100H
The AirTAC SE50 Standard Cylinder SE50BX100H is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke100 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50BX100H
The AirTAC SE50BX100H is a double-acting single-rod ISO 15552 profile cylinder engineered for rigorous environments, delivering a 982 N push force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, flush-mounting body that naturally resists corrosion and simplifies fixture integration.
Configured for thermal and chemical endurance, this specific SKU utilizes a SUS304 stainless steel rod for washdown durability alongside a high-temperature FKM (Viton) seal that safely extends the operating range up to 150 C. The end caps house field-adjustable pneumatic cushioning at both ends, allowing technicians to tune deceleration and soften hard end stops dynamically.
Airtac SE50 Standard Cylinder SE50BX100H Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50BX100H |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50BX100H
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50BX100H Is Used
Thermoforming Mold Clamping
Clamps plastic sheet heating molds with 982 N of extend force, where the FKM seal survives radiant heat up to 150 C and the SUS304 rod resists factory humidity.
Bottling Line Diverter
Actuates routing gates on a 100 mm stroke to sort glass containers, relying on the tie-rod-free extruded profile to mount flush within narrow conveyor frames.
Heat-Seal Jaw Actuation
Drives vertical sealing jaws in a packaging machine, using the field-adjustable pneumatic cushion to soften impact and protect the heat-seal bars at cycle end.
Is the Airtac SE50 Standard Cylinder SE50BX100H the Right Cylinder?
This 50 mm bore generates 982 N push at 0.5 MPa, sitting neatly between the 40 mm bore (628 N) and the 63 mm bore (1559 N), allowing precise sizing for mid-weight loads. As a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for competing ISO 15552 cylinders, matching the 50 mm stroke, PT1/4 port, and standard mounting accessories without footprint changes. Note that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device, so loads will drift if air pressure is lost. Because this SKU lacks the -S magnet, it cannot host CMSE or DMSE position sensors without changing the piston assembly.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50BX100H FAQ
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force reaches 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. Equipped with a Viton (FKM) seal, its operating temperature extends from -20 to +150 C.
Yes, it is dimensionally interchangeable with any standard ISO 15552 profile cylinder, matching the PT1/4 port and 50 mm bore mounting dimensions. However, it cannot hold a load unpowered; the adjustable air cushion only decelerates the piston near stroke end and does not function as a mechanical lock.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50BX100H
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.