Airtac SE50 Standard Cylinder SE50BX100S
The AirTAC SE50 Standard Cylinder SE50BX100S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 100mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke100 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50BX100S
The AirTAC SE50BX100S is a double-acting, single-rod ISO 15552 profile cylinder engineered for rigorous duty. It provides a robust 982 N push force at 0.5 MPa and features a 100 mm stroke. The square extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames without protruding hardware.
This specific configuration integrates a SUS304 stainless steel rod (code B) for superior performance in corrosive or washdown environments, and includes a built-in magnet (code S) for position sensing. The integrated magnet interfaces seamlessly with AirTAC CMSE reed and DMSE electronic switches fitted into the body's three sensor grooves. Furthermore, pneumatic cushioning at both ends is field-adjustable, allowing you to tune end-of-stroke deceleration and eliminate hard mechanical impacts.
Airtac SE50 Standard Cylinder SE50BX100S Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50BX100S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 100 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50BX100S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×100 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50BX100S Is Used
Flow Wrapper Carton Sealing
Drives the sealing jaw on continuous flow wrappers where the 982 N push force securely crimps packaging film, while the SUS304 rod withstands daily washdown cycles.
Bottling Line Diverter Gate
Actuates a routing flap on a bottling conveyor using the 100 mm stroke, relying on the built-in magnet and DMSE sensors to confirm gate position for high-speed sorting.
Lab Sample Carousel Indexing
Positions a sample carousel in analytical equipment, where the adjustable air cushions soften stops to protect delicate glass vials during rapid 100 mm extensions.
Is the Airtac SE50 Standard Cylinder SE50BX100S the Right Cylinder?
When sizing this 50 mm bore cylinder, compare its 982 N push at 0.5 MPa against the adjacent bores. If your load requires less force, stepping down to the 40 mm bore yields 628 N push, saving space and air consumption. If you need substantially more thrust, stepping up to the 63 mm bore provides 1559 N push. This model's PT1/4 port and M16x1.5 rod thread provide a balanced interface for medium-duty loads.
Because this is a standard double-acting cylinder, it will drift and cannot hold a load if air pressure is lost or the valve is centered; use a BSE rod lock for position holding. The SUS304 rod is ideal for food processing or chemical splash zones. As a true ISO 15552 profile cylinder, it is dimensionally interchangeable with other ISO 15552 cylinders, allowing you to use existing mounting accessories like FA front flanges or LB foot brackets for a fast retrofit.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50BX100S FAQ
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force reaches 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE profile is dimensionally interchangeable per ISO 15552 standards, allowing a direct replacement using your existing mounting hardware. The built-in magnet (-S) is specifically designed to trigger AirTAC CMSE reed switches and DMSE electronic sensors in the body's three sensor grooves.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50BX100S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.