
The AirTAC SE50 Standard Cylinder SE50BX350 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 350mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50BX350 is a double-acting, single-rod ISO 15552 profile cylinder engineered to deliver 982 N of push force and 825 N of pull force at 0.5 MPa. Its square extruded aluminum barrel eliminates external tie rods, yielding a compact, flush-mounting body that naturally resists corrosion and simplifies bracket installation. The SUS304 stainless steel piston rod makes this specific SKU highly suited for corrosive environments or strict washdown duty.
This 50 mm bore unit features a 350 mm stroke and operates at speeds from 30-800 mm/s. Field-adjustable air cushioning at both end caps allows technicians to tune the deceleration of the piston via a set screw, softening hard mechanical impacts during high-cycle operations. Note this configuration omits the internal position-sensing magnet, so it does not directly support AirTAC CMSE or DMSE electronic switches without modification.
| Model | Airtac SE50 Standard Cylinder SE50BX350 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Executes 350 mm routing strokes to shift plastic containers between filling lanes, utilizing the SUS304 rod to withstand frequent washdowns.
Drives a mechanical arm to fold corrugated cardboard flaps prior to sealing, relying on the 982 N push force to overcome spring resistance.
Pushes tested specimen trays out of a chemical analysis bay, where the stainless steel rod prevents corrosion from reagent exposure.
When sizing this actuator, compare its 982 N push at 0.5 MPa against your actual load: stepping down to a 40 mm bore yields 628 N, while stepping up to a 63 mm bore provides 1559 N. Because this model features a 350 mm stroke, the unsupported piston rod is subject to bending forces under heavy lateral loads—an external guide rail is strongly recommended to prevent rod-bearing wear. As a standard ISO 15552 profile cylinder, it serves as a dimensionally interchangeable direct replacement for other ISO 15552 cylinders, sharing standardized mounting and PT1/4 port dimensions.
Keep in mind that a standard double-acting cylinder cannot hold a load if air pressure is lost or the valve is centered; the piston will drift. If your application requires true position holding without live air pressure, consider the AirTAC BSE series with an integrated rod lock. For this SE50BX350, ensure you pair it with appropriate ISO 15552 mounting accessories and note that the SUS304 rod is ideal for food-grade or chemical splash zones.
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N. The maximum drive force is 200 kgf when operated at the 1.0 MPa pressure limit.
Yes, the SE50BX350 is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting footprint, PT1/4 port size, and 20 mm rod thread of other 50 mm ISO 15552 profile cylinders, allowing for a direct retrofit.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.