
The AirTAC SE50 Standard Cylinder SE50BX350S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 350mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50BX350S is a double-acting, single-rod ISO 15552 profile cylinder engineered for a 50 mm bore and 350 mm stroke. It delivers 982 N of push force at 0.5 MPa and features a field-adjustable air cushion at both ends to soften end-stop impact. The SUS304 stainless steel rod provides essential corrosion resistance for washdown environments.\n\nBuilt with a square extruded aluminum barrel that eliminates external tie rods, this design mounts flush against frames while offering sensor grooves on three sides. The integrated magnet enables precise piston tracking with CMSE reed or DMSE electronic sensors, and the M16x1.5 rod thread handles high side-load stress effectively.
| Model | Airtac SE50 Standard Cylinder SE50BX350S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 350 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×350 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
The SUS304 rod withstands washdown chemicals while the 982 N push force reliably diverts glass bottles on a high-speed packaging line.
Utilizing the 350 mm stroke to open and close accumulation lanes, the adjustable cushion softens the stop for heavy loaded pallets.
The -S magnet pairs with DMSE sensors to confirm machine guard door position, while the tie-rod-free profile mounts flush to the enclosure.
At 0.5 MPa, this 50 mm bore generates 982 N of push force. If your application requires less force, stepping down to the 40 mm bore yields 628 N. For heavier loads, stepping up to the 63 mm bore provides 1559 N. \n\nBecause the 350 mm stroke exceeds 300 mm, the unsupported piston rod is highly susceptible to bending under side loads; integrating an external guide rail is strongly recommended to prevent premature rod-bearing wear. Remember that the adjustable air cushion only decelerates the piston near the stroke end—it does not hold the load. If air pressure drops, the piston will drift, requiring a BSE rod lock for secure position holding. As a true ISO 15552 profile cylinder, it serves as a direct replacement sharing standard mounting interface dimensions and PT1/4 ports.
Quick checklist
The SE50BX350S provides 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum of 200 kgf at 1.0 MPa. It operates at speeds between 30-800 mm/s.
Yes, the SE50BX350S is dimensionally interchangeable per ISO 15552 standards. It shares standard mounting interface dimensions and PT1/4 ports, allowing it to serve as a direct replacement for other ISO 15552 profile cylinders.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.