
The AirTAC SE50 Standard Cylinder SE50BX450S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 450mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50BX450S is a double-acting single-rod profile cylinder built to ISO 15552 dimensions, delivering a 982 N push at 0.5 MPa across its 450 mm stroke. It features a SUS304 stainless steel piston rod, making it highly suitable for corrosive environments or washdown applications where standard carbon steel would fail.
The extruded aluminum barrel omits external tie rods, yielding a compact body that mounts flush against frames while resisting contamination. Equipped with a built-in magnet, this unit directly supports AirTAC CMSE reed and DMSE electronic sensors for precise end-position detection.
| Model | Airtac SE50 Standard Cylinder SE50BX450S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 450 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×450 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Routes PET bottles on a washdown conveyor using the 450 mm stroke and SUS304 rod, resisting moisture while providing 982 N push to deflect product lanes.
Actuates a secondary film wrap arm on an automated packaging station, utilizing the 825 N pull force to tension material across the extended stroke.
Pushes processed chemical trays out of a testing chamber, where the stainless rod prevents corrosive vapor degradation and the magnet confirms full ejection.
This 50 mm bore provides 982 N push and 825 N pull at 0.5 MPa. If your application requires less force, the 40 mm bore offers 628 N push; if you need significantly more power, stepping up to the 63 mm bore yields 1559 N push. Because the stroke is 450 mm, the unsupported length increases bending moments on the M16x1.5 rod and bearing, so an external guide is recommended to prevent premature side-load wear.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 profile cylinders. It uses a PT1/4 port and retains field-adjustable air cushioning at both ends to soften end stops. Note that a plain SE cylinder will drift if air pressure is lost; if your process demands static load holding, consider the BSE rod lock variant instead.
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N push and 825 N pull. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf when operating at the 1.0 MPa pressure limit.
No, a standard SE cylinder cannot hold a load without live air pressure. The adjustable air cushions at both ends only decelerate the piston near the stroke end; they do not function as a brake. For position holding, you need the BSE variant with a rod lock or an external pilot-operated check valve.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.