
The AirTAC SE50 Standard Cylinder SE50BX500S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 500mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
The AirTAC SE50BX500S is a double-acting single-rod profile cylinder built to the ISO 15552 standard, delivering a 982 N push at 0.5 MPa across its 500 mm stroke. This configuration pairs a standard aluminum extruded barrel with a SUS304 stainless steel rod, making the unit highly suitable for corrosive environments or routine washdowns without sacrificing structural integrity.
Because the barrel lacks external tie rods, the body sits perfectly flat against machine frames for simplified mounting. The integrated magnet allows seamless positioning feedback using AirTAC CMSE reed or DMSE electronic sensors, while the field-adjustable air cushions at both ends let you tune end-of-stroke deceleration to match your moving load.
| Model | Airtac SE50 Standard Cylinder SE50BX500S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Uses the 500 mm stroke and SUS304 rod to shift plastic containers between filling lanes during washdown cycles, relying on the 982 N force to overcome side friction.
Extends rapidly to fold heavy cardboard flaps on automated packaging machines, utilizing the adjustable cushion to prevent harsh impacts at the end of the 500 mm travel.
Moves fluid sample racks between testing stations, leveraging the DMSE electronic sensor feedback and stainless rod to maintain sterile, corrosion-free operation.
When sizing this actuator, compare its 982 N push at 0.5 MPa against your system limits. If you need less force, stepping down to the 40 mm bore yields 628 N; moving up to the 63 mm bore provides 1559 N. This SE50BX500S is dimensionally interchangeable with other ISO 15552 cylinders, meaning you can retrofit it using existing mounting hardware like an FA front flange or TC trunnion alongside its PT1/4 ports.
At 500 mm of travel, the unsupported mass of the piston and rod places higher bending moments on the rod bearing, so incorporating an external guide rail is strongly recommended to prevent premature seal wear. Remember that a standard cylinder does not hold position if air pressure drops; if your process requires fail-safe load holding, consider the BSE rod-lock variant or an external pilot-operated check valve.
Quick checklist
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
Yes, the SE50BX500S is dimensionally interchangeable per ISO 15552 standards. It shares the same mounting footprint and PT1/4 port locations as comparable profile cylinders, allowing for a direct replacement using your existing brackets and hardware.
Genuine AirTAC parts produced by AirTAC factory.
Covers non-human-caused product damage.
Standard models are processed and dispatched in 3-5 business days.
Most inquiries answered within 7-8 hours.
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.