Airtac SE50 Standard Cylinder SE50BX500SH
The AirTAC SE50 Standard Cylinder SE50BX500SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 500mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke500 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50BX500SH
The AirTAC SE50BX500SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It features a SUS304 stainless steel rod and a Viton (FKM) seal, expanding the operating temperature range up to 150 C for washdown or high-heat duty. Delivering 982 N of push force at 0.5 MPa, it integrates seamlessly into existing ISO 15552 footprints.
The extruded aluminum barrel omits external tie rods, yielding a compact, corrosion-resistant body that mounts flush on packaging machinery. Field-adjustable air cushioning at both ends allows technicians to tune end-of-stroke deceleration, softening hard impacts during high-speed 500 mm extensions. The integrated magnet (-S) directly supports CMSE reed and DMSE electronic sensors for precise position tracking.
Airtac SE50 Standard Cylinder SE50BX500SH Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50BX500SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 500 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50BX500SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×500 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50BX500SH Is Used
Flow Wrapper End-Seal Jaws
Drives the 500 mm stroke on high-temperature flow wrappers, utilizing the Viton seal and SUS304 rod to withstand thermal exposure during end-seal jaw actuation.
Bottle Line Divert Gate
Shifts product flow on bottling conveyors where washdown chemicals require a stainless rod; the 982 N push force easily moves loaded divert gates.
Lab Drying Oven Door
Actuates the heavy insulated door of an industrial drying oven, leveraging the 150 C FKM seal to maintain integrity inside the heated chamber.
Is the Airtac SE50 Standard Cylinder SE50BX500SH the Right Cylinder?
Generating 982 N push at 0.5 MPa, this 50 mm bore sits between the 40 mm (628 N) and 63 mm (1559 N) bores, allowing you to step down for lighter loads or up for heavier rigs. As a standard 500 mm stroke, it falls within the 50 mm bore's 1200 mm maximum limit. For this 500 mm extension, the M16x1.5 rod and bearing are subject to bending moments under side loads; utilizing an external guide rail prevents premature wear. Note that the adjustable air cushion only decelerates the piston near stroke end and does not hold the load if air pressure is lost. For position holding without live pressure, consider a BSE rod lock variant. This cylinder is dimensionally interchangeable with other ISO 15552 cylinders, sharing standard PT1/4 ports and mounting hardware.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50BX500SH FAQ
At 0.5 MPa, the 50 mm bore provides 982 N of push force and 825 N of pull force. At 0.7 MPa, push increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The 50 mm bore supports standard strokes up to 1200 mm.
Yes. The SE50BX500SH uses a Viton (FKM) seal rated for temperatures up to 150 C and a SUS304 stainless steel rod for corrosion resistance. The -S magnet works with CMSE reed and DMSE electronic sensors, and the profile barrel lacks external tie rods for easy cleaning.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50BX500SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.