Airtac SE50 Standard Cylinder SE50BX600
The AirTAC SE50 Standard Cylinder SE50BX600 is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 600mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke600 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50BX600
The AirTAC SE50BX600 is a double-acting single-rod ISO 15552 profile cylinder engineered for a 600 mm stroke. It delivers a robust 982 N push force at 0.5 MPa and utilizes a PT1/4 port. Designed with a square extruded aluminum barrel, this profile body eliminates external tie rods, yielding a compact footprint that mounts flush against frames while actively resisting mechanical corrosion.
This specific configuration features a SUS304 stainless steel rod (code B) tailored for corrosive or washdown environments. It lacks a built-in magnet, meaning position sensing is not available on this SKU out of the box. The cylinder relies on field-adjustable pneumatic air cushions at both ends to decelerate the piston near stroke end, softening hard mechanical stops during high-speed operation.
Airtac SE50 Standard Cylinder SE50BX600 Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50BX600 |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50BX600
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50BX600 Is Used
Bottling Line Capping Head
Leverages the SUS304 rod and 982 N push force to withstand washdowns while driving a capping head over a 600 mm travel distance.
Lab Sample Ejection
Uses the full 600 mm stroke to push processed test tubes out of a centrifuge, relying on adjustable cushions to prevent glass breakage at high speeds.
Pallet Dispenser Separation
Employs the 825 N retract force to pull empty pallets from a magazine stack, where the tie-rod-free profile prevents debris buildup.
Is the Airtac SE50 Standard Cylinder SE50BX600 the Right Cylinder?
Selecting this 50 mm bore makes sense when you need 982 N of push at 0.5 MPa. If your application requires less force, stepping down to the 40 mm bore yields 628 N of push, whereas stepping up to the 63 mm bore provides 1559 N of push. Because the 600 mm stroke is substantial, the unsupported piston rod is highly susceptible to bending under side loads; integrating an external guide is strongly recommended to prevent premature rod-bearing wear.
As a dimensionally interchangeable ISO 15552 cylinder, it serves as a direct replacement for other ISO 15552 cylinders, sharing standard mounting hardware. Remember that a plain SE cylinder does not hold its load when air is lost or the valve is centered—the piston will drift. If your process requires true position holding without live pressure, consider the BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50BX600 FAQ
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.
This specific SE50BX600 SKU does not include a built-in magnet, so it cannot support AirTAC CMSE or DMSE position sensors out of the box. You would need a variant with the -S magnet option to enable electronic or reed switch sensing.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50BX600
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.