Airtac SE50 Standard Cylinder SE50BX600SH
The AirTAC SE50 Standard Cylinder SE50BX600SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 600mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke600 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50BX600SH
The AirTAC SE50BX600SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It features a SUS304 stainless steel rod for superior corrosion resistance and a high-temperature FKM (Viton) seal, widening the operating range from -20 to 150 C. Delivering 982 N of push force at 0.5 MPa, it integrates seamlessly into existing setups via its standardized mounting interface.
Its square extruded aluminum barrel omits external tie rods, yielding a compact, flush-mounting body that naturally resists debris buildup. The integrated magnet (-S) enables precise end-position detection with CMSE reed or DMSE electronic sensors, while the field-adjustable pneumatic cushioning at both ends allows you to fine-tune deceleration for this long 600 mm stroke.
Airtac SE50 Standard Cylinder SE50BX600SH Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50BX600SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 600 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50BX600SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×600 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50BX600SH Is Used
Bottling Line Diverter
Routes plastic containers on a washdown conveyor, utilizing the 982 N push force and SUS304 rod to withstand harsh chemical cleaning agents.
Industrial Oven Door
Actuates a 600 mm thermal isolation gate, relying on the FKM Viton seals to maintain integrity in ambient temperatures up to 150 C.
Film Roll Tensioning
Maintains precise tension on a packaging web, using the integrated magnet and DMSE electronic sensors to confirm stroke endpoints.
Is the Airtac SE50 Standard Cylinder SE50BX600SH the Right Cylinder?
This 50 mm bore generates 982 N push at 0.5 MPa. If your application requires less force, the 40 mm neighbor provides 628 N; if you need to step up, the 63 mm bore offers 1559 N. Because this unit features a 600 mm stroke, the extended rod is susceptible to bending under heavy side loads—always incorporate an external guide rail to support the payload and prevent premature rod-bearing wear.
As a standard ISO 15552 profile cylinder, it serves as a direct dimensional replacement for other ISO 15552 cylinders, sharing identical mounting footprints and PT1/4 ports. Remember that the adjustable air cushion only decelerates the piston near stroke end; it is not a locking device. If the machine must hold a vertical load without live air pressure, pair this cylinder with an external rod lock or pilot-operated check valve.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50BX600SH FAQ
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force increases to 1374 N, with a maximum push capacity of 200 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, the SE50BX600SH is dimensionally interchangeable per ISO 15552. You can use it as a direct replacement for other ISO 15552 profile cylinders, matching the 50 mm bore, 600 mm stroke, PT1/4 port, and standard mounting accessories.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50BX600SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.