Airtac SE50 Standard Cylinder SE50BX60SH
The AirTAC SE50 Standard Cylinder SE50BX60SH is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 60mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke60 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50BX60SH
The AirTAC SE50BX60SH is a double-acting, single-rod ISO 15552 profile cylinder engineered for demanding environments. It generates 982 N of push force at 0.5 MPa and 1374 N at 0.7 MPa, making it well-suited for mid-range actuation tasks. The extruded aluminum barrel lacks external tie rods, yielding a compact, corrosion-resistant body that mounts flush against machine frames while keeping debris traps to a minimum.
Configured with a SUS304 stainless steel rod and a high-temperature FKM seal, this variant operates reliably up to 150 C. The built-in magnet supports CMSE reed and DMSE electronic sensors for precise end-of-stroke detection, while the field-adjustable air cushioning at both ends allows you to fine-tune deceleration and soften hard mechanical stops.
Airtac SE50 Standard Cylinder SE50BX60SH Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50BX60SH |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 60 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50BX60SH
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×60 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50BX60SH Is Used
Flow Wrapper End-Sealing
Drives the upper sealing jaw on a continuous-motion flow wrapper, using the 982 N push force at 0.5 MPa to crimp film seams reliably in high-temperature environments.
Laboratory Sterilizer Door
Actuates the heavy door of an autoclave sterilizer, leveraging the SUS304 rod and FKM Viton seal to withstand 150 C steam washdowns without degrading.
CNC Lathe Chuck Ejector
Pushes finished metal parts out of a CNC lathe collet, using the 60 mm stroke and DMSE electronic sensors to trigger the parts conveyor at high speeds.
Is the Airtac SE50 Standard Cylinder SE50BX60SH the Right Cylinder?
If your application requires less force, stepping down to a 40 mm bore yields 628 N of push at 0.5 MPa, whereas moving up to a 63 mm bore provides 1559 N. This SE50BX60SH features a 60 mm stroke, PT1/4 port, and a basic mounting interface. Remember that a standard double-acting cylinder relies on live air pressure to hold a load; if the air supply drops, the piston will drift. For fail-safe position holding, consider the BSE rod-lock variant or an external pilot-operated check valve. Because the stroke is under 300 mm, the 20 mm rod handles the side loads effectively without requiring an external guide.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50BX60SH FAQ
At 0.5 MPa, this 50 mm bore cylinder provides 982 N of push force and 825 N of pull force. At 0.7 MPa, the push force is 1374 N. The maximum push force is 200 kgf at 1.0 MPa. It operates at speeds between 30 and 800 mm/s, with a PT1/4 port and a 20 mm rod thread.
Yes, the SE50BX60SH is dimensionally interchangeable with other ISO 15552 profile cylinders, allowing a direct retrofit using standard mounting hardware. Additionally, its FKM Viton seal and SUS304 stainless steel rod expand the operating temperature range up to 150 C, making it ideal for washdown and high-heat duty.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50BX60SH
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.