verified AirTAC China Authorized Export Seller shield 100% Genuine AirTAC Parts workspace_premium 1-Year Warranty
appsShop by Modelexpand_more
person shopping_cart Request a QuoteQuote
AirTAC SE Series · ISO 15552 Cylinder

Airtac SE50 Standard Cylinder SE50BX750S

The AirTAC SE50 Standard Cylinder SE50BX750S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 750mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.

  • BoreØ50 mm
  • Stroke750 mm
  • Port sizePT1/4
  • Acting typeDouble acting
  • Rod threadM16×1.5
  • CushionAdjustable, 30 mm
$234.46 $241.96Save 3% Standard model — ready in 3-5 business days to process and dispatch
Request a Quote
  • No minimum order. A single piece can be ordered.
  • Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
Compare every SE50 stroke, mounting and version on one page All SE50 codes →
verified Genuine AirTAC workspace_premium 1-year warranty bolt Reply in 7-8 h

About the Airtac SE50 Standard Cylinder SE50BX750S

The AirTAC SE50BX750S is a double-acting single-rod ISO 15552 profile cylinder engineered for a 750 mm stroke. It features a SUS304 stainless steel piston rod, making it highly suitable for corrosive environments or washdown duty where standard carbon steel rods would degrade. Delivering a robust 982 N push force at 0.5 MPa, it handles substantial linear actuation tasks with ease.

This model incorporates a built-in magnetic ring for non-contact position detection, seamlessly interfacing with AirTAC CMSE reed and DMSE electronic sensors. The extruded aluminum square barrel omits external tie rods, yielding a compact, flush-mounting body that resists corrosion and simplifies bracket installation. Field-adjustable air cushioning at both stroke ends allows technicians to precisely tune end-of-stroke deceleration, softening mechanical impacts during high-speed operations.

Airtac SE50 Standard Cylinder SE50BX750S Technical Specifications

ModelAirtac SE50 Standard Cylinder SE50BX750S
SeriesSE ISO 15552 profile cylinder
Bore sizeØ50 mm
Stroke750 mm
Acting typeDouble acting
Port sizePT1/4
Rod threadM16×1.5
FluidAir (filtered by 40µm element)
Operating pressure0.15 – 1.0 MPa
Proof pressure1.5 MPa
Temperature-20 to +70 °C (0–150 °C with FKM seals)
Speed range30 – 800 mm/s
CushionAdjustable, 30 mm
Max strokeUp to 1200 mm

Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).

Theoretical Output Force (Ø50mm)

PressurePush forcePull force
0.5 MPa982 N825 N
0.7 MPa1374 N—
Max (@1.0 MPa)200 kgf

Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.

Model Code: Airtac SE50 Standard Cylinder SE50BX750S

SEISO 15552 / VDMA 24562 profile-barrel double-acting cylinder.
50Bore size in mm.
×750Stroke length in mm.
-SOptional built-in magnet for CMSE / DMSE sensor sensing.

Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).

Where the Airtac SE50 Standard Cylinder SE50BX750S Is Used

conveyor_belt

Bottling Line Diverter

Uses the 750 mm stroke to push containers between parallel conveyor lanes, relying on the SUS304 rod to withstand frequent washdowns and cleaning chemicals.

packaging

Pallet Film Roll Feed

Extends the full 750 mm to position stretch film rolls on automated pallet wrappers, utilizing the 982 N push force to move heavy rolls smoothly.

science

Lab Sample Transport

Actuates sample trays across testing stations where the stainless steel rod prevents corrosion in humid or chemically exposed laboratory environments.

Is the Airtac SE50 Standard Cylinder SE50BX750S the Right Cylinder?

Selecting this 50 mm bore cylinder makes sense when your application requires 982 N of push force at 0.5 MPa. If your load is lighter, stepping down to the 40 mm bore drops the output to 628 N, saving valuable space and air consumption. Conversely, if you need more thrust, the 63 mm bore increases the push force to 1559 N. Because this is a 750 mm stroke, the extended piston rod is highly susceptible to side-load bending; always incorporate an external linear guide to prevent rod-bearing wear and premature seal failure.

As a standard ISO 15552 profile cylinder, the SE50BX750S offers a direct replacement footprint for any existing ISO 15552 cylinder, matching standard mounting dimensions and PT1/4 ports without requiring custom brackets. Note that while the adjustable air cushions decelerate the piston near stroke end, they do not function as a locking mechanism; if air pressure is lost or the valve is centered, the load will drift. For position-holding safety, consider the BSE rod-lock variant or an external pilot-operated check valve.

Quick checklist

  • ✓ Required force at your working pressure
  • ✓ Stroke and mounting space
  • ✓ Port/thread type (PT/G)
  • ✓ Magnet (-S) for CMSE/DMSE sensors?
  • ✓ Side load — consider a guided cylinder
Ask an Engineer

Installation & Maintenance Notes

  • check Use clean air filtered to 40µm or finer.
  • check Keep within 0.15 – 1.0 MPa operating pressure.
  • check Avoid side load on the piston rod.
  • check Adjust end cushion screws for smooth stops.
  • check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
  • check Installation by qualified personnel per AirTAC docs.

Airtac SE50 Standard Cylinder SE50BX750S FAQ

At 0.5 MPa, the push force is 982 N and the pull force is 825 N. At 0.7 MPa, the push force increases to 1374 N. The maximum push force is 200 kgf at 1.0 MPa. The operational speed range is 30-800 mm/s.

Yes, the SE50BX750S is dimensionally interchangeable per ISO 15552 standards. It shares the exact mounting interface and PT1/4 port locations of other ISO 15552 profile cylinders, allowing for a direct retrofit without modifying your equipment.

verified

Authorized Export Seller

Genuine AirTAC parts produced by AirTAC factory.

workspace_premium

1-Year Warranty

Covers non-human-caused product damage.

local_shipping

Fast Dispatch

Standard models are processed and dispatched in 3-5 business days.

bolt

Fast Reply

Most inquiries answered within 7-8 hours.

Related AirTAC SE Cylinders

Request a Quote for Airtac SE50 Standard Cylinder SE50BX750S

Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.

Thank you. We received your request for SE50BX750S and will confirm price, stock and lead time — usually within 7-8 hours.

For the fastest response, keep the complete model number above and include a clear photo of the product label. If photo upload is unavailable, email photos to [email protected] with your model number.