Airtac SE50 Standard Cylinder SE50BX850S
The AirTAC SE50 Standard Cylinder SE50BX850S is a genuine double-acting ISO 15552 / VDMA 24562 profile-barrel air cylinder with a Ø50mm bore and 850mm stroke, PT1/4 air ports and adjustable end cushioning. Its standardized mounting interface makes it interchangeable with other ISO 15552 cylinders at the mounting interface.
- BoreØ50 mm
- Stroke850 mm
- Port sizePT1/4
- Acting typeDouble acting
- Rod threadM16×1.5
- CushionAdjustable, 30 mm
- No minimum order. A single piece can be ordered.
- Ready in 3–5 business days. That is the time we take to process the order and hand it to the carrier. Transit time after that depends on the destination.
About the Airtac SE50 Standard Cylinder SE50BX850S
The AirTAC SE50BX850S is a double-acting single-rod ISO 15552 profile cylinder engineered for a 50 mm bore and an 850 mm non-standard stroke. It delivers a robust 982 N push at 0.5 MPa, utilizing a SUS304 stainless steel rod (code B) specifically chosen for corrosive or washdown environments. The square extruded aluminum barrel omits external tie rods, yielding a compact footprint that mounts flush against machine frames while resisting contamination.
This unit features a built-in magnet (code S) for non-contact position detection using AirTAC CMSE reed or DMSE electronic sensors. To absorb kinetic energy at stroke ends, field-adjustable air cushions at both ends allow technicians to tune exhaust bleed-off, softening hard mechanical impacts at operating speeds up to 30-800 mm/s.
Airtac SE50 Standard Cylinder SE50BX850S Technical Specifications
| Model | Airtac SE50 Standard Cylinder SE50BX850S |
|---|---|
| Series | SE ISO 15552 profile cylinder |
| Bore size | Ø50 mm |
| Stroke | 850 mm |
| Acting type | Double acting |
| Port size | PT1/4 |
| Rod thread | M16×1.5 |
| Fluid | Air (filtered by 40µm element) |
|---|---|
| Operating pressure | 0.15 – 1.0 MPa |
| Proof pressure | 1.5 MPa |
| Temperature | -20 to +70 °C (0–150 °C with FKM seals) |
| Speed range | 30 – 800 mm/s |
| Cushion | Adjustable, 30 mm |
| Max stroke | Up to 1200 mm |
Specifications follow the official AirTAC SE series datasheet and ISO 15552 / VDMA 24562 dimensions. Confirm against the product label before installation. Port options: PT (standard) / G (BSPP).
Theoretical Output Force (Ø50mm)
| Pressure | Push force | Pull force |
|---|---|---|
| 0.5 MPa | 982 N | 825 N |
| 0.7 MPa | 1374 N | — |
| Max (@1.0 MPa) | 200 kgf | |
Actual usable force is lower than theoretical due to friction and back-pressure. Size with a safety margin.
Model Code: Airtac SE50 Standard Cylinder SE50BX850S
| SE | ISO 15552 / VDMA 24562 profile-barrel double-acting cylinder. |
|---|---|
| 50 | Bore size in mm. |
| ×850 | Stroke length in mm. |
| -S | Optional built-in magnet for CMSE / DMSE sensor sensing. |
Rod material: carbon steel (blank) / SUS420J2 (A) / SUS304 (B). Seals: TPU (blank) / FKM high-temp (H) / NBR (N). Thread: PT (blank) / G. Mounting: Basic, LB, FA, FB, CA, CB, CR, TC, FTC, TCM1, TCM2. Related SE-family variants: SED (double rod), SEJ (adjustable stroke), BSE (rod lock), BSED (double-rod rod lock).
Where the Airtac SE50 Standard Cylinder SE50BX850S Is Used
Stainless Steel Food Conveyor Divert
Leveraging the SUS304 rod for washdown durability, this 850 mm stroke cylinder pushes product lanes on a food-grade packaging line, utilizing its 982 N push force to overcome friction on stainless belts.
Palletizing Robot End Effector
The long 850 mm stroke extends to push corrugated cartons onto a palletizer queue, while the built-in -S magnet triggers DMSE electronic sensors to confirm full extension in the PLC.
Laboratory Sample Dispensing Gate
Acting as a corrosion-resistant gate valve in a chemical testing lab, the SUS304 rod withstands solvent splashes while the adjustable cushion prevents sudden stops from jarring sensitive fluid vials.
Is the Airtac SE50 Standard Cylinder SE50BX850S the Right Cylinder?
Choosing this 50 mm bore makes sense when a machine requires 982 N of push force at 0.5 MPa. If your application carries a lighter payload, stepping down to the 40 mm bore drops the output to 628 N, saving valuable space and air volume. Conversely, heavier loads requiring more thrust should step up to the 63 mm bore, which provides 1559 N of push at 0.5 MPa. Because this model has an 850 mm stroke, the 20 mm rod and rod-end bearing face increased bending moments under side loads; always pair it with an external guide rail to prevent premature seal wear.
As a dimensionally interchangeable ISO 15552 cylinder, the SE50BX850S serves as a direct replacement for other ISO 15552 profile cylinders, matching the exact 50 mm bore, 850 mm stroke, PT1/4 port, and standardized mounting accessory footprint. Note that while its adjustable cushions decelerate the piston near stroke end, a plain SE cylinder cannot hold a load vertically if air pressure is lost; for position holding, consider a BSE rod lock variant.
Quick checklist
- ✓ Required force at your working pressure
- ✓ Stroke and mounting space
- ✓ Port/thread type (PT/G)
- ✓ Magnet (-S) for CMSE/DMSE sensors?
- ✓ Side load — consider a guided cylinder
Installation & Maintenance Notes
- check Use clean air filtered to 40µm or finer.
- check Keep within 0.15 – 1.0 MPa operating pressure.
- check Avoid side load on the piston rod.
- check Adjust end cushion screws for smooth stops.
- check Use correct mounting accessory (LB/FA/FB/CA/CB/CR/TC/FTC/TCM1/TCM2).
- check Installation by qualified personnel per AirTAC docs.
Airtac SE50 Standard Cylinder SE50BX850S FAQ
The 50 mm bore generates 982 N push and 825 N pull at 0.5 MPa, 1374 N push at 0.7 MPa, and a maximum of 200 kgf at 1.0 MPa. The operating speed ranges from 30-800 mm/s.
Yes, the SE50BX850S is dimensionally interchangeable per ISO 15552 / VDMA 24562 standards. You can drop it into existing mounting hardware matching the 50 mm bore and 850 mm stroke without modifying the machine frame.
Authorized Export Seller
Genuine AirTAC parts produced by AirTAC factory.
1-Year Warranty
Covers non-human-caused product damage.
Fast Dispatch
Standard models are processed and dispatched in 3-5 business days.
Fast Reply
Most inquiries answered within 7-8 hours.
Request a Quote for Airtac SE50 Standard Cylinder SE50BX850S
Send us the quantity and destination. We confirm price, stock and lead time — usually within 7-8 hours.